WD-45 carburator

[Leonard Dacus]

I have a marvel schebler TSX 871 carburator on a wd-45 Allis Chalmers, was not running very good,so took carburator off for a cleaning found the jet in bottom of bowl is not there(just the threaded hole).Tractor has been in family for 30+ years as it was my Dad's so I have no idea where it went , need to find new jet. Who would be most likely to have one? Good place to check would be appreciated.

Thanks
 

[old]

Best place to start would be an Agco dealer since they now own the A/C brand or tractor then go from there. This site may even have them
 

[bg/mo]

Try a good Napa auto parts store, they can get the rebuild kits mite be able to get more parts also.
 

[JMS/.MN]

Factory M-S carb for the WD45 is the TS464 series. Got changed over the years?
 

[ACEd]

TSX871 shows up as WD45, D15, D17 in a book I have - not sure if it was late WD45 or a replacement carb, but best source is probably someone who rebuilds carbs - there are several that sell parts as well as do repairs - Google Marvel Schebler - I think 1 is The Carburetor Doctor - also someone maybe on this or AC site that specializes in AC. I have used Matt at Motec Engineering for rebuilds with good results - he seems to have a lot of cores but not sure if he would sell parts.
 

[stu (ON)]

All have given sound advice. If you check the AGCO web site:

http://agcopartsbooks.com/PartsBooksN/login.aspx?ReturnUrl=%2fEpsilonWeb%2fbook.aspx%3fbook%3dagco%2f79001544&book=agco%2f79001544

Log on as Guest and search under AGCO Allis WD45. Two MS categories for WD45 lump TSX-561, TSX-464 & TSX-773 together while TSX-871 is listed separately, likely later engines. But it looks like the nozzle you want is common to them all and is AGCO part # 70226460, so it should be available.

If other sources don't have it, try Steve at 973-632-5596