Dearborn two disc plow setup

[rgvnaa]

Hi, i recently bought at dearborn two disc plow in good condition, i was wondering if any body could help me with the set up of the plow. the plow does not seem to be digging in like it should. also i was wondering if the bearing caps were normal or revese thread. if any body could point me the way or share some advice on the set up and plowing i would appreciate it. thanks
 

[maxwell99]

try n tractor . com

go to this site, you should find your model number and they will have a manual you can look at.

however, this is a locked site so you may not be able to open the site.

if not, try n tractor.com and work from there.

its a great site with all kinds of manuals of old ford and ferguson equipment.
 

[rgvnaa]

Thanks. I'll look.
 

[Bill Corder]

[quote="rgvnaa"](quoted from post at 23:10:00 12/20/12) Hi, i recently bought at dearborn two disc plow in good condition, i was wondering if any body could help me with the set up of the plow. the plow does not seem to be digging in like it should. also i was wondering if the bearing caps were normal or revese thread. if any body could point me the way or share some advice on the set up and plowing i would appreciate it. thanks

Send me an email and I'll send you a copy.
 

[Bill Corder]

If it is a Dearborn 10-80 I'll send you a copy of the manual.

sailor4you@hotmail.com
 

[Jeff B.]

I have a Dearborn 10-14 plow. I don"t suppose you"d have any info on that one would you?
If so, my e-mail"s open.
Thanks,
Jeff