Yesterday's Tractor Co. Parts for Farm Tractors - Compare our Prices!
Click Here or call 800-853-2651 
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

600 Series Distributor


 
Post new topic    
View previous topic :: View next topic  
Author Message
DJohnson
New User


Joined: 07 Jan 2013
Posts: 3


Report to Moderator

PostPosted: Mon Jan 07, 2013 11:52 am    Post subject: 600 Series Distributor Reply to specific post Reply with quote

I need a distributor for a ‘55 Ford 600. I ordered one from Yesterday’s Tractor and after I had it in hand I realized it fits the ’58 and later tractors. The shaft is longer by roughly an 1/8 inch. I haven’t found anyone who sells a replacement for the FAA-12176-A distributor, or the parts to rebuild the original.

Can this be adapted for use in the early 600’s by simply shortening the oil pump drive shaft? Are there any other differences, aside from the cam weight assembly?
 
Back to top
View user's profile
old
Tractor Guru


Joined: 12 Mar 2000
Posts: 56833
Location: Lake of the Ozarks area of MO

Report to Moderator

PostPosted: Mon Jan 07, 2013 12:53 pm    Post subject: Re: 600 Series Distributor Reply to specific post Reply with quote

Slotted shaft or hex shaft??? The CT supply has both listed and what you may have it a NAA distributor and or even an NAA tractor or a mutt that has the NAA engine instead of the 600 series engine
 
Back to top
View user's profile
DJohnson
New User


Joined: 07 Jan 2013
Posts: 3


Report to Moderator

PostPosted: Mon Jan 07, 2013 2:03 pm    Post subject: Re: 600 Series Distributor Reply to specific post Reply with quote

It's a hex shaft to the oil pump on both.
 
Back to top
View user's profile
DJohnson
New User


Joined: 07 Jan 2013
Posts: 3


Report to Moderator

PostPosted: Mon Jan 07, 2013 2:19 pm    Post subject: Re: 600 Series Distributor Reply to specific post Reply with quote

The distributor I pulled off the tractor has a metal label marked “FDN” & “5A3” riveted to it if that means anything.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
TRACTOR   PARTS TRACTOR   MANUALS
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We have the parts you need to repair your tractor.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651.

YT Home  |  Forums Home

Copyright © 1997-2014 Yesterday's Tractor Co.

Powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters