1030 air breather in 830?

[dbock]

Does anyone know if you can replace the oil bath air breather on a 830 with a dry type air breather from a 1030 and it still fit under the hood in front of the radiator?

Thanks,
Dan B
 

[Lamont]

I don't think it would fit. The front bolster and grill screens for a 1030 are longer. I've thought about checking to see if it would work by replacing the complete bolster, nose cone and screens but never have.
 

[Bill talbert]

It will work but need to adapt hose sizes!
 

[jllw]

i put a 1030 breather on this one u just have to remove the pannel beside the screen to get the filter out and the 1030 stack is offset to one side

 

[Glenn F.]

Sharp! What size are those rear tires?

Glenn
 

[dbock]

Thanks! That is exactly the info I was looking for. My 830 is similar to yours except it is a case o matic and it has a m&w turbo on it which is why I would like the dry type filter. I also like the steps you have on yours. I assume they came from a 1030 or 930 also? Did they bolt right up?
 

[jllw]

the steps i had to weld a bracket on them and fenders did also because its not a flat deck tractor 18-4-34 rubber
 

[Earlj]

JLLW I like the CK fenders on that tractor could you post a picture of how they are put on, or are the strong enough just bolted at the axle Thanks
 

[jllw]

i origonaly had them braced from diffrent spots but i came across a rops and canopy so i then bolted them to it which was much stronger sa to say i have sold it since pics were took i wish i had it back



 

[Earlj]

Thanks for the pictures
 

[j hikemper]

I knew You Would wish you had kept it ! LOL .. Did you Get your price ?, and did You place that new 830 in a Good home ?, i remember seeing it when i was there last , You fellas done a SUPER NICE job with that 830..