Oil and hydraulic fluids for 67 MF135

[dw1973]

I need help with the oil fill hole location and the hydraulic fill hole locations for a Continental Z145 engine MF135. Also, capacities for both? Thanks, DW
 

[Tom from Buckeye Lake]

Mine a 150, same engine. Motor oil fill is forward left side sitting on tractor. It has a "T" handle, loosen counter clockwise, pull it out, 6 quarts.

Hyd oil, fill is large square head plug next to shifter, thinking 8 gal in the 150. I used permi-tran from dealer. Hyd and differential are common cavity.
 

[dw1973]

Thank you sir.
 

[maxwell99]

i used shell rotella 15w40 in the motor as it still has the zinc additive, for long motor life.

but as tom said,

buy your trans/hyd fluid from the dealer,
you do not want to buy some cheap off the wall oil and ruin your hyd system or trans.

does your model have a trans/hyd sump filter that can be changed.
 

[dw1973]

Thanks - not sure about the trans/hyd sump filter - location? I have the Deluxe 135 model with Z145 Cont. gas engine.
 

[Tom from Buckeye Lake]

Your filter is in the belly of the beast. If you DO NOT have IPTO, remove left cover with the pto lever to get to filter. If you have IPTO, lift cover must come off.

By the way, there are two drain plugs for Hyd oil to get it all out.