Mora, MN pull

[pullinforfun]

has anyone of you guys pulled at the Mora,Mn county fair? if so, are they strick as they say on rules? thanks
 

[oliverlover982]

I have pulled there many times and yes they typically are pretty strict especially when it comes to weight. But like anywhere else everyone usually gets away with something, but it's always a good pull and usually a good turn out. Do you live in that area?
 

[pullinforfun]

i live down by St. Croix WI. im gonna be pulling a 560 this year. they say you need side shields covering the torque tube? and you cant have front alum. rims and you need fenders. i got this info from the website they have for there fair.
 

[oliverlover982]

You are required to have fenders for safety purposes but not necessarily your stock fenders you just need something there between you and the tires and I"ll check about what exactly they mean about the shield on the torque tube and get back to you. Is it just a straight up farm stock tractor or? I"ve pulled my 77 there and my buddy pulls his m and 1066 there every year.
 

[Pmer]

http://www.kanabecfair.org/index.php?option=com_content&view=article&id=84:tractor-pull-regulations&catid=79&Itemid=474

Here is a copy of the rules for folks that want to look. It's a farm stock pull with any age of tractor allowed. They don't really have a class for a div.5 Farmall. They used to run a hobby stock class and there it would've needed a saftey blanket and ETC.

I think there should be a phone number for you to call. I've ran smaller front tires there in farm stock and there are one or two regulars that don't have stock fuel tanks too. I have never seen them tech a tractor.
 

[pullinforfun]

tractor is all stock. But it dosent have a pto. factory cover. (didnt come with one). ill be pulling in the 7000# "farm stock". thanks for the info
 

[oliverlover982]

Then you shouldn't have any problems pulling it there or anywhere else in this area
 

[pullinforfun]

ok. thanks