Yesterday's Tractor Co. Parts for Farm Tractors - Compare our Prices!
Click Here or call 800-853-2651 
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

UP DATE on 8.3 Cummins into a 2150 four wheel drive


 
Post new topic    
View previous topic :: View next topic  
Author Message
the tractor vet
Tractor Guru


Joined: 24 May 2000
Posts: 12667


Report to Moderator

PostPosted: Thu Feb 21, 2013 3:54 pm    Post subject: UP DATE on 8.3 Cummins into a 2150 four wheel drive Reply to specific post Reply with quote

This is FUN and we are moving along . we have the engine we have the engine to the three speed we have a NEW flywheel and all that is left is the motor mounts and to come up with a fan hub to raise the fan up about four inches and it is a done deal . This is a piece of cake transplant and instead of 135 Hp. the new life blood will be 207 hp. One old 2150 brought back to new life and will be back to work when the weather clears. May have to take some pictures of this and try and post them.
 
Back to top
View user's profile
Oliver662011
Regular


Joined: 05 Nov 2007
Posts: 257
Location: Castalia,Ohio

Report to Moderator

PostPosted: Thu Feb 21, 2013 5:34 pm    Post subject: Re: UP DATE on 8.3 Cummins into a 2150 four wheel drive Reply to specific post Reply with quote

Sounds Great would love to see some pictures!
Mike
 
Back to top
View user's profile AIM Address Yahoo Messenger
B A Star
Long Time User


Joined: 05 Mar 2009
Posts: 606


Report to Moderator

PostPosted: Thu Feb 21, 2013 7:34 pm    Post subject: Re: UP DATE on 8.3 Cummins into a 2150 four wheel drive Reply to specific post Reply with quote

   Oliver powertrains were a good design, however thats a lot of power to be transmitted through a transmission and final drive that was an earlier design.  The 2-135 / 2-155 had much larger gears and the 2-180 had gears that were 1/3 larger than the 135/155.

   Good luck
 
Back to top
View user's profile
S.D.L.
Regular


Joined: 08 Nov 2011
Posts: 302


Report to Moderator

PostPosted: Thu Feb 21, 2013 9:25 pm    Post subject: Re: UP DATE on 8.3 Cummins into a 2150 four wheel drive Reply to specific post Reply with quote

Yes, please post pictures as you can.
 
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Oliver, Cletrac, Coop and Cockshutt All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
TRACTOR   PARTS TRACTOR   MANUALS
Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We have the parts you need to repair your tractor.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651.

YT Home  |  Forums Home

Copyright © 1997-2014 Yesterday's Tractor Co.

Powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters