(800) 853-2651
SHOP NOW

Search results

  1. F

    Variety of Ellis Chalmers G tractor parts hundred dollars for all of it come and get it

    I would take it all but you are probably not even close to Nebraska are you?
  2. F

    Wd spindle

    I do not know where you can get a new one but there are plenty of used ones that pop up in a google search.
  3. F

    snap coupler

    There should be a spring that automatically holds it up. I don't know where it is located, if no one chimes in soon I will try to google its location. It should be on the latch/hook itself but may be at the base of the release handle.
  4. F

    Have you ever used this?

    yes, but only a couple times out of curiosity. I have two or three of them lying around.
  5. F

    Long 360 no power to rear wheels?

    I agree with being meticulous on the tear down and reassembly. A misplaced, forgotten or accidently damaged part will cause you way more problems than you already have.
  6. F

    Long 360 no power to rear wheels?

    This just a guess since I not familiar with long tractors or that style of differential, but it looks like you will have to remove the snap rings that hold the shafts in the side gears. Remove both shafts and the differential should come out. Once that is out you can remove the ring gear and...
  7. F

    Long 360 no power to rear wheels?

    I watched your video again and I see what you mean. The little gears which are called planetary gears have too much free play. You will have to remove that pin that they are on and roll them out. You either need to replace/add some shims or the differential carrier spread/cracked and will...
  8. F

    Long 360 no power to rear wheels?

    Are both wheels on the ground with pressure on them in the video? If yes, then you definitely have a problem with one of the bull pinion shafts. With both wheels on the ground the side gears should be doing the same thing, in your video you will notice that the left gear is staying put and the...
  9. F

    Long 360 no power to rear wheels?

    Since you have not found any evidence of damage. I would say you either have a broken shaft or stripped splines. I say work from both ends and meet in the middle. What I consider easiest to hardest. You pulled the final drives, so I assume you already looked over the stub axles and bull gear...
  10. F

    ATF added to motor oil?

    I heard of doing that back in the day of nondetergent oils and carburation but nothing like that with today's engines. I do not think you would hurt anything but with today's quality of oils, I think all you would be doing is thinning out your oil. Instead of running 5w30 you would be running...
  11. F

    Please help with Year, Model and worth please

    Definitely an unstyled allis WC no newer the 1938. Based on the pictures are the rear steel wheels and fenders. The wheels are worth 300-500 dollars and the fenders are worth around $300. At minimum it needs a magneto or distributor @$100+. It looks like it may need new front tires, it is...
  12. F

    1947 C Allis-Chalmers does not want to start

    First off welcome to YT! Second off do not be too concerned about what voltage of battery the starter is hooked to. A starter is a starter, too low of voltage and cranking amps are way worse on the starter than too high. The 6 volt starter will just crank faster on 12 volts, while it may not...
  13. F

    Tractor identification

    The engine casting number says it is a ford 5000. Whether this engine fits other models I do not know. According to the serial number chart I found you are missing a digit from the tractor serial number photo in the first picture, if it is indeed a ford 5000.
  14. F

    WC Allis Front Wheel

    Later hubs should work. The only issue you may have is, the new hubs may take different bearing sets. Ironically one of the things on my to do list is to switch the later style hubs on my 1936 wc with round spoke hubs.
  15. F

    Lisle torx bits.

    You should be able to take it to any store that sells lisle tools and get it warrantied. Some will do it over the counter and others will send it in. Don't give up on the first try. Every store is different but warranty is warranty. I just had an Ace brand torx socket with lifetime warranty...
  16. F

    WD-45 serial number decode

    The only way I know to find the year of an allis is to look up the serial number. On this site you click on the resources tab, click serial numbers, and click on allis chalmers then find the model and find where your serial number falls. In your case the serial number is slightly smaller than...
  17. F

    ca engine serial number

    I am not near my CA to verify but IIRC it is on left side of block. There should be a smooth flat spot in the center that should have the number on it.
  18. F

    Tools to move a washer and dryer (full size stackable)

    The dryer should be held on by two hook brackets and four phillips head screws. Simply remove the screws to separate dryer from washer.
  19. F

    Kind of a Medical Tool

    Good to know they are an option. After 35 years of regular nose bleeds I have learned to handle them well. Thankfully I clot quickly but this seems to be diminishing with age.
  20. F

    WD45 Diesel Oil Pressure

    First verify your actual pressure. I do not know what it should be on a diesel but on a gas 7 to 12 psi is about all you will have when warmed up. Since you mentioned stems make sure the filters are cotton packed and not paper. I am guessing they are correct since you have some kind of...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top