(800) 853-2651
SHOP NOW

Search results

  1. M

    Ring gear procedure

    Okay, I'm ready to split my tractor. I've got everything separated that should be, according to the manual. Is there any particular order to removing the bolts between the motor block and the rear end?
  2. M

    Ring gear procedure

    My friend and I found that out (the bevel) the hard way. There's an old timer in town who knows what he's doing so I'll let him do it. I think I'll replace the clutch and throw-out bearing as well. Both highly recommended by other old timers.
  3. M

    Ring gear procedure

    mhb, Yea, I'm aware of that. We did try to heat it the first time around. I'm guessing that we didn't get it hot enough because we just couldn't get it over the lip. Hence, we went with the welds. Thanks for the reminder. That's why I am going to a machine shop this time around. There's an...
  4. M

    Ring gear procedure

    Jim, Interesting. When I read Emam's post, that thought did cross my mind but I had never heard of any other ring but the starter ring gear. That answers my question. I Thank both of you. The first time I did this a friend did it and I was just a spectator so this will be fun. ;) He had a...
  5. M

    Ring gear procedure

    I'm replacing my ring gear on my 9N. Couple questions: 1. Do I need to drain the oil? I did the first time I did this but my antique neighbor is saying I don't. He's an old rancher with two antique tractors in his shed so I tend to believe him. On a different note, my clutch sticks. By that I...
  6. M

    Starter???

    A couple years ago I replaced a starter and ring gear on my 9N. Everything worked fine until recently. Now, when I press the starter button, I get a whine (well, kind of a cross between a whine and a grind). I removed the starter and turned the crank and all the teeth are still there, which is...
  7. M

    9N 12 volt wiring

    JMOR, I found another site called myfordtractors.com with a pictogram that you had posted. It was exactly what I needed. I was able to have my tractor running in about an hour. Thank you so much!!
  8. M

    9N 12 volt wiring

    Hello everyone. I've posted a few items here before and everyone has been extremely helpful. Recently I replaced a ring gear on my 9N (with the help of a friend). I should have taken pictures before but I'm just not that smart. Now, I have to figure out how to reconnect all the wires. The...
  9. M

    9N Head Gasket

    Just got it ordered. Thanks!
  10. M

    9N Head Gasket

    I'm going to try and find that conversation so I can comment more intelligently. Thanks for the response though and to the others for suggestions on the best gasket to use.
  11. M

    9N Head Gasket

    Newbie here. I had a 9N given to me a few years ago. I discovered oil in the antifreeze last winter and was told that I probably had a bad head gasket. I was out looking for a replacement on this site and found that there are two types, a 6051A and a 6051B. One is soft and the other is...
  12. M

    9N frozen radiator

    Thanks again, Leroy. This is really useful information. I parked it under cover and decided to let it rest until spring. It's just too danged cold here in MN and I'm due for a knee replacement. I tried pulling the hood on mine once and you're right, at 65 it is definitely a two man job. I...
  13. M

    9N frozen radiator

    Thanks Leroy, et.al. I pushed my tractor into my garage and drained the radiator. I then replaced the antifreeze without flushing. I live in MN and it is cold so I didn't have access to an easy way to do the flushing. I'm curious about a couple things though. I was only able to put in two...
  14. M

    9N frozen radiator

    Hey everyone. Thanks for all the help! I was able to push it into my garage. Made the wife help. Built a fire in the wood stove and its warming up as we speak. I also drained the radiator and bought new antifreeze. I was able to get about half a five gallon pail of old fluid out of it so I'm...
  15. M

    9N frozen radiator

    A few years ago I had a 9n given to me. When I look in the radiator, I see ice. I would like to drain the radiator and replace the antifreeze. Is there an easy to thaw the radiator? Should I be worried about anything else?
  16. M

    Blown something

    Jim, this diagram looks like mine. I'm going to try and include some pics to see if I am close to describing these things correctly. Never done it before and the quality of the pics is not great. The first one is what I am calling the solenoid, and the second is what I am calling the starter...
  17. M

    Blown something

    One old to another. Is that "smoked" as in destroyed?
  18. M

    Blown something

    Jim, thanks for this. As my first post implied, I am very new to this. So, solenoid may not have been the best choice of words. Pictures always help. :)
  19. M

    Blown something

    Thomas, is that available on Amazon?
  20. M

    Blown something

    Rookie here. So my 9N was running fine until yesterday. Good battery, new starter and new solenoid as of last fall. Yesterday I hit the starter button and it sounded funny, though it did start. The next time it didn't turn the starter though it did hum . . sort of. I let up on the starter button...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top