(800) 853-2651
SHOP NOW

Search results

  1. M

    Int 464 head scratcher of a fuel problem

    I think it's in your gas tank, the flow is being blocked off by something? Could be rust, on my 574 it was some gooey crap like dead bees or? not sure exactly - Once cleaned out though, hasn't died in years.
  2. M

    IH 674 gas tractor - runs like %$#@...

    Those clones, you know sometimes you get something a lot less than the original. If this was my problem, i'd take the carb off, set it up on a bench with the bowl off, use some small hose & small funnel, hold the float up, see if gas runs out around the needle & seat. If it's running in from...
  3. M

    my ih 574 loader hydraulic hookup

    Everything on the tractor works as it should Harry - The hitch, pto, brakes, & steering the one aux valve & the 2 spool valve I plumbed in. Just used it yesterday. Boy, the wind was cold.
  4. M

    674 ih diesel loader plumbing

    My post about this is here - https://forums.yesterdaystractors.com/threads/my-ih-574-loader-hydraulic-hookup.1648053/#post-10911145 No power beyond, aux valve is untouched, working with no problem for 25+ years. Maybe not superfast, but who cares, I'm on nobody's timeclock.
  5. M

    IH 674 gas - Replacement Clone Carburetor?

    Some years ago [15?] I was at where you are now, ready to buy a $$$$$ carb for my 574 gasser - It ran like crap [when you could get it started] I'd been through all the easy stuff, plugs, wires, points, gas filter etc. A good friend stopped one day when it was running, sat there listening...
  6. M

    International 574 Hydraulic Problems

    I bought a 574 new back in '74 - Had the same issue you have now around '88 - Mine was the caused by the flow divider on the bottom of the MCV. sticking . The reason it was sticking was caused by me, too cheap at the time to change the hydraulic fluid & filter. Get it good & warm, pull the...
  7. M

    Ebay seller Greenbacking AKA Kevin Killen of IND contact

    So I had a great transaction with greenbackin - They had a pair of nice looking Goodrich 18.4 X26 tires on Massey rims on ebay - Mine from the mid 70's were really showing their age. 995.00 buy it now - I emailed for shipping quote before clicking the 'buy it now' They got back to me same...
  8. M

    vinegar to clean radiators

    The 5% works pretty good in a SS syrup evaporator for loosening up 6 weeks of what sticks in the corners of your pans. You have to let it sit a few days. I have some 30% to try this coming season, I bet you don't want to splash it in your eye.
  9. M

    Can you get a real garden tractor now days?

    My old JD 285 with over 2200 hrs was about wore out - I bought a Steiner 440 [used 100 hrs] to replace it. Mostly 'cause it will pull my Eastonmade splitter anywhere it has to go. 4 wd, it came with a 5' front mower, a front blade [power angle] and what they call a 'slip scoop' a smallish...
  10. M

    International 574 issue running in run position

    My 574 gasser had the same type issue - The problem was bottom of the gas tank, right where the glass bowl screws in - Gotta take it out & get the crud out.
  11. M

    560 run a backhoe?

    I have a JD [bradco] 3ph backhoe, I use on my 574 when I need to. The tractor has a 12 gpm pump too, it's no speed demon, but theres no time clock on me. I've dug out some rocks & stumps that barely wiggled when I started. You might want some front end weight, as these are pretty heavy.
  12. M

    Farmall A sickle bar

    I had an A years ago, the sickle bar mower bolted right under the tractor, 6 bolts I think on the rear. - It had a 6 ft bar & manual lift . Made a man out of you picking that head up & down. Not sure if I have a pic. I'll look.
  13. M

    Easy Off Oven cleaner

    I've found WD40 to be worthless as a penetrating fluid - might as well use orange juice.
  14. M

    IH 674 gas tractor - runs like %$#@...

    Gas in the engine oil - Bad fuel pump? How else could it get in there? Years ago my 574 [gasser too] was really running bad, i did all the easy stuff [plugs, points, etc] was getting ready to order a carb, about 200.00 at the time - A friend that i miss dearly was at my place one day, told me...
  15. M

    454 gas not running right

    Joe - If your problem [needing the choke] started after you had the carb. off & apart, then you put the plastic venturi back in upside down.
  16. M

    my ih 574 loader hydraulic hookup

    Not what I said - The fluid goes through the new 2 spool valve, back through the aux valve, and back to the system. All works as it should.
  17. M

    my ih 574 loader hydraulic hookup

    Some 30 years ago, i needed to add a 2 spool valve for a loader on my 574. This is what i came up with, it's worked ever since. The pics are hard to get, wheel & tire and muffler are in the way. Down on the MCV, I took off the steel pressure line that goes up under the seat to the one aux...
  18. M

    international 464 tractor

    The plastic or brass venturi on top of the carburetor needs to be big end up -
  19. M

    Really hard starting cub

    I agree with Larry about the valves -
  20. M

    International 454 missing

    My 574 did the same thing a few years ago - There is trash [rust, etc] in the bottom of the gas tank, right above the fuel bowl, you have to drain the tank, remove the bowl & shutoff valve to clean it out. Also, a fine screen in the carb right where the fuel line goes in.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top