Search results

  1. C

    1950 8n conplete engine rebuild only have 10# psi

    Maybe I missed it. But what am I looking at inside the filter can?
  2. C

    49 8N low oil pressure when engine is hot. Cam bearings??

    Correct. Here's the back story. I did a complete rebuild on this engine in 2003. It ran great had 40 psi oil pressure. At about 600 hours, after rebuild, there was a knock in the engine. There was good oil pressure, should have been my first clue, but I brought it back to the workshop and...
  3. C

    49 8N low oil pressure when engine is hot. Cam bearings??

    Correct. Here's the back story. I did a complete rebuild on this engine in 2003. It ran great had 40 psi oil pressure. At about 600 hours, after rebuild, there was a knock in the engine. There was good oil pressure, should have been my first clue, but I brought it back to the workshop and...
  4. C

    49 8N low oil pressure when engine is hot. Cam bearings??

    Ok. I started talking about this in another thread. I was asked, by another member, to start a new thread for this discussion. So here goes. I completely rebuilt my engine. Running straight 30w oil, I get 60psi oil pressure. As the engine gets warmer, the pressure drops to below 5 psi at...
  5. C

    8N oil pressure

    I have a question. I rebuilt my 8n engine. All tolerances are within spec. My oil pressure at startup is about 60psi, verified with an independent gauge, then at running temp at idle, it is about 5 psi. I pulled the pan and checked rod and main bearings and oil pump, good. I rechecked the...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top