Search results

  1. F

    Ferguson 35 Hydraulic Adjustments

    I currently have my top cover at the dealership being worked on. The cam for the lift arms had a groove cut in it because the roller that rides on it was rusted up. They welded the grove and ground it flat. They are currently replacing the rollers that are worn or rusted up. I guess I will wait...
  2. F

    Ferguson 35 Hydraulic Adjustments

    I have a Ferguson 35 tractor and I removed the hydraulic top cover to do some repair to the hydraulic system. Attached is a picture of the control arms (Numbers 25 & 26) that must be adjusted. I cannot get them adjusted correctly. I watched Rachel Gingell do this on youtube, so I followed her...
  3. F

    ferguson 35 3 Point Issues

    I have a Ferguson 35 with an old 5 ft brush hog. It will not lift it off the ground much higher than 4 inches. I put an old 3 point cultivator on, it lifts up fine. The position lever is in constant pumping and the arms do not go high enough unless the draft control lever is used as a position...
  4. F

    Ferguson 35 3 Point Issues

    Ok, thank you.
  5. F

    Ferguson 35 3 Point Issues

    I have a Ferguson 35 with an old 5 ft brush hog. It will not lift it off the ground much higher than 4 inches. I put an old 3 point cultivator on, it lifts up fine. The position lever is in constant pumping and the arms do not go high enough unless the draft control lever is used as a position...
  6. F

    Tractor Boneyards In Michigan

    I am looking for a power steering pump for a Massey Ferguson 35 with a Z134 engine. Where is a good Massey boneyard in eastern Michigan?
  7. F

    Homemade 3 Point Implements

    Ones like IH 185 or JD 71 either cost a fortune or are laying in the weeds rotted away.
  8. F

    Homemade 3 Point Implements

    I have a 3 point carry all with no deck on it. I thought about putting a wood deck on it.
  9. F

    Homemade 3 Point Implements

    I have a Ferguson 35 and looking to make a 3 point implement. I am in metal shop in high school and need a project idea. I want something that I can use... I have a 3 point hitch receiver/trailer mover and a crate made out of expanded steel for the front. I would like to build a 2 row 3 point...
  10. F

    In Search of Ferguson 35 Power Steering Pump

    I am in search of a power steering pump for a Ferguson 35 gas (Continental Z134 engine). I plan on rebuilding it and using it as a pump for remote hydraulics. Where could I find a used one? I would purchase a new one if they did not cost over $500. I am located in eastern Michigan. Also, what...
  11. F

    MF 65 Drag Link

    The front end of the drag Link coming from the steering box is worn on a 65. I looked in an online AGCO parts catalog and it is no longer available. It is number 8 in the picture. I heard of people cutting the end of and welding a similar one on. I cannot even find just the end. Where could I...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top