Search results

  1. T

    Ford 8n bush hogging question

    I’m used to using a 57 hp Massey and it usually runs this bush hog with ease so I’m just not used to this smaller tractor but it’s doing good I just have to be patient with her.
  2. T

    Ford 8n bush hogging question

    I have an 8n ford and I’m running a 5foot bush hog. It seems to be bogging down in the thicker grass when I run it about 3/4 Throttle. I’ve been running it at full throttle and it seems to be doing fine in first gear. I’m thinking it’s just because the grass it’s pretty thick. Any ideas? I’ll...
  3. T

    Ford 801 Sputters and dies under load.

    I will clean it out and let you know what happens.
  4. T

    Ford 801 Sputters and dies under load.

    So the gas in the tank was boiling and I replaced the fuel cap and I also put some heat shielding tape below the tank and on top of the the muffler and it no longer boils. I havent changed the pot of stew in be cleaner yet could the be causing the problem?
  5. T

    Help!! Ford 801 Won t stay running after carb cleaning.

    Fixed the problem the main jet screw in the bottom of the carb was screwed all the way in. Turned it out a few turns and now it runs like a top.
  6. T

    Ford 801 select o speed won't shift into 10th gear

    Fixed it. So what I ended up doing was switching the sos level to the left side and somehow that fixed the problem now it shifts through all the gears.
  7. T

    Ford 801 Sputters and dies under load.

    Ive got a ford 801 with the 172 gas engine. When Im plowing the field and put the tractor under a good load it does fine for a few passes but then it soon starts to sputter and stalll. If you let it cool off for a minute it will run fine again but after a few minutes of plowing it goes right...
  8. T

    Ford 801 select o speed won't shift into 10th gear

    So my 801 won't shift up into 10th gear for some reason. it won't actually let me shift the shifter into 10th gear it acts like 9th gear is the last gear on the shifter. Is this a common problem and what can I do to fix this?
  9. T

    Help!! Ford 801 Won t stay running after carb cleaning.

    Found the problem the main fuel screw was screwed all the way in. Runs great now!
  10. T

    Help!! Ford 801 Won t stay running after carb cleaning.

    No it gets a really good suction and it will pull some gas out.
  11. T

    Help!! Ford 801 Won t stay running after carb cleaning.

    I just recently purchased this ford 801 with the 2.8 gas engine. I put new points and condenser, spark plug wires and spark plugs. I drained the tank and put a new fuel settlement bowl on. I also just rebuild this carb throughly and it is spotless on the inside. The tractor will start and run on...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top