Search results

  1. T

    John Deere 1010 clutch issue

    After close inspection, I found that the clutch friction disc sustained damage, when incorrectly installed. The hub side was toward the throw-out bearing. When that issue was corrected, I did not notice that the disc sustained damage and one side was now concave. I’ve ordered a new friction disc...
  2. T

    John Deere 1010 clutch issue

    I will decrease the free play and check all of the throwout bearing linkage as well as the yoke that harnesses the throwout bearing. Thanks for the input and I’ll advise!
  3. T

    John Deere 1010 clutch issue

    Yes. Adjusted the pedal to about 3/4 inch of free play.
  4. T

    John Deere 1010 clutch issue

    I have a John Deere 1010 with a clutch that will not fully disengage. The tractor sat for a couple years, not running. Motor has been fixed and is running. I’ve installed a new pilot bearing, a new throw-out bearing and new friction disc. The existing pressure plate fingers were adjusted using...
  5. T

    John Deere 1010 clutch issue.

    John Deere 1010 gas tractor with a clutch that will not fully disengage. It sat for a couple years, not running. Made some motor repairs, new pilot bearing, throw-out bearing and friction disc. Motor runs great, if it is started in gear, it tries to creep forward. If started in neutral, it’s...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top