(800) 853-2651
SHOP NOW

Search results

  1. A

    Fluid for MF 35 with newer pump & other issues

    Wondering how your tractor is doing on the legacy fluid. My dealer sold me that to put in my Massey 175 after we did a split and fixed the leaking seals and out a new clutch in. Haven’t filled it up yet because I want to make sure it’s safe to use
  2. A

    Value of this tractor

    Thank you guys, I know it isn't much to go off of but it is all the info I have at the time. I will pass the information along
  3. A

    Value of this tractor

    Thank you. Could be. I haven’t seen it just this pic
  4. A

    Value of this tractor

    Looks like a 600 series. This is the only pic I have. A friend is trying to help cousins settle an estate. He is going to get the serial number and a pic of the gear shifter next time he is out there
  5. A

    Thoughts on these two Ferguson tractors.

    Looking for thoughts and a value on a couple tractors A friend is trying to help some cousins with an estate Supposedly they run the grey one I’m assuming is a to20 has a loader and a 5’ brush hog Sorry these are the only pics I have
  6. A

    More 175 troubles (rear end)

    Thank you guys very much for all the help. so do you think if i put a new seal in it wold stop the leak? I will get some more pics of the brake side when I get home from work. I have to take my daughter to the dr friday and I am hoping to make it up to the deale to order parts
  7. A

    More 175 troubles (rear end)

    I am not against fixing it just trying to get this tractor going. my son bought it 2 years ago and has been fixing one problem after another. I just want him to be able to pull a hay rake and mow with it. the seal on the axle where it sets is buggered up. you can see in the pics. I need to look...
  8. A

    More 175 troubles (rear end)

    This was broken and repaired before we bought the tractor, we were just trying to get the brakes working and discovered this when we took it apart. I was just trying to get it back working it is leaking a little bit I don’t see any metal in the diff and I dot really care if the locker works. I...
  9. A

    More 175 troubles (rear end)

    The one in the diff. The one in the first pic. Do I take those bolts out behind it or am I getting into a big can of worms. I have never done this before. That Bering is bent you can kind of see it in the pic. I don’t know if I can find that plate as a used part or if I need to weld it up and...
  10. A

    More 175 troubles (rear end)

    How do we get that bearing out? Can I take those bolts out around it and it come out then press it off? Honestly I don’t care about the diff lock I just want it usable. The boy has been working on it over a year. Also does anyone know what the axle where the seal rides should mic at? The brakes...
  11. A

    More 175 troubles (rear end)

    Well got the right hand trumpet off and there is some pretty good damage inside. The bearing is shot in the rear end. Not sure how or what’s involved in getting it out. Also the diff lock is gone and I think the inside plate that the brakes are on has been damaged and that’s why it is leaking...
  12. A

    NF to WF on a Ford 961

    How big of a job is it to switch a NF to a WF on a Ford 961? And does anyone make a WF or would I be looking for a salvage yard or a parts machine? My teenage son really likes these tractors but his mother id dead set against a NF
  13. A

    Early 2000

    What are the pros and cons of the early 2000? The ones that have the rounded hoods? I have located one that I believe is a 5spd. So they have live pto? Live hydraulics? Looking for a small gas chore tractor My kids raise a few steers and about a dozen hogs so feeding square bales moving...
  14. A

    175 rear wheel question

    Will a 12x28 power adjust rear wheel fit a 175 massey? I haven't went and looked at the wheel yet but if it is 12" between the beads would it work?
  15. A

    175 trumpet stud size

    Well my son is ready to put the left trumpet back on, the next problem is the paper gaskets must of drawn some moisture from the air and have curled up a bit. Anyway to save them? Or best to just go get some new ones?
  16. A

    175 trumpet stud size

    Also does anyone know the torque spec for the nuts?
  17. A

    175 trumpet stud size

    thank you sir
  18. A

    175 trumpet stud size

    Does anyone knoe the finr thread pitch size on the studs that hold the trupet on? we are redoing the rear brakes and I wanted to chase the threads since a couple are a little dinged up. Thank you I went to the local hardware store and they were out of fine thread nuts to try and see I have a...
  19. A

    Portable hog floor

    he would be doing maybe 20 a year at most probably. I found some plans to buils a wooden one and have a bunch of new treated lumber that I have thought about building a wwoden one. I wonder if it would last 5 years? Also would you completly cover it? I was thinking 8x16 and doing 2 rounds of...
  20. A

    Portable hog floor

    Does anyone raise hogs on a movable floor like a “hog haven”? My son has started raising pigs and his business is growing pretty good. but the mud has us looking at a new option wit being able to grab the pen around the pasture and move it as needed. I can’t really find a used one so looking at...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top