(800) 853-2651
SHOP NOW

Search results

  1. M

    Alternator conversion to 1 wire

    Hello Michford, I'm having issues with my alternators also. My local Napa has the alternator you used and I can get it tomorrow. Can you tell me how you wired it just to be sure? Also, is your battery still charging properly? Thank you and have a great day.
  2. M

    63/64 Ford 4140 Paint Small Grill

    My grille is a thick metal mesh.
  3. M

    63/64 Ford 4140 Paint Small Grill

    I just finished painting mine... Benjamin Moore BS4054 Mimosa Yellow, direct to metal, low luster. Sprayed on with Harbor freight electric paint sprayer. Went on really well and holds up. I paid $84 for a gallon at Benjamin Moore paint Store and had some left over. Also, you can wash...
  4. M

    19-299 Backhoe - how to clean cylinder tube bore

    Hi Bern, Just reporting back... I serviced both swing cylinders and installed them today. I just finished up. I put the backhoe through its paces and dug a hole. No leaks anywhere on my tractor, not the motor, the loader cylinders/manifold, or the backhoe cylinders/manifold. Gave everything a...
  5. M

    19-299 Backhoe - how to clean cylinder tube bore

    Yes Fritz, I will definitely do that. Thank you for your advice.
  6. M

    19-299 Backhoe - how to clean cylinder tube bore

    Ha ha... previous owners! The guy I bought this from didnt do anything to fix this tractor. You should have seen the radiator, globs of jbweld all over it and god knows what they poured into it. When I took the engine apart and removed the frost plugs from the block and coolant passages, it was...
  7. M

    19-299 Backhoe - how to clean cylinder tube bore

    Perfect answer! That was what I was hoping. Ill let you know how it works out. Thanks again Bern.
  8. M

    19-299 Backhoe - how to clean cylinder tube bore

    How can they replace the barrel on this swing cylinder with the pivots on it? I can see cutting the end off but not the front part. Thank you for your insights.
  9. M

    19-299 Backhoe - how to clean cylinder tube bore

    Okay, that sounds less painful. I took a picture of the barrel. You can see what Im referring too. Resize the photo with your fingers. It looks like glazing. What do you think?
  10. M

    19-299 Backhoe - how to clean cylinder tube bore

    Yes, Ill be calling all three hydraulic shops that I have been visiting tomorrow morning and see what they have to say. Two are 15 minutes away, and Complete Hydraulics is 35 minutes away... they made the rod $325. I think it needs honing to clean it up but not to sleeve it or require larger...
  11. M

    19-299 Backhoe - how to clean cylinder tube bore

    1963 Ford 4140 HD Industrial TBL 723 10 19-299 backhoe Hello, I recently had the right swing cylinder leaking like a hose out the air breather when swung fully right. I removed and disassembled the cylinder. I found the rod bent and the back side of the piston with the nut was packed in...
  12. M

    Swing Cylinder Packing Gland removal

    Yes, that is something I thought about also to make sure it doesn't happen again. I just dropped off the bent rod to have a new one made. Thank you for your advice and taking the time to help me out. I appreciate it.
  13. M

    Swing Cylinder Packing Gland removal

    HI Fritz, I was over thinking this having never pulled a cylinder apart before. I pulled the packing out one piece at a time from the backside of the gland and then the front collar piece came right out. I pulled the left swing cylinder and disassembled it to check the chrome rod and thank...
  14. M

    Swing Cylinder Packing Gland removal

    Well the chrome rod is slightly bent in the middle and there is definitely some damage to the rod like skid marks along the shaft as well as a hair line groove cut around the rod in that location. I contacted Messicks to locate one as well as contacted Complete Hydraulics about 30 minutes...
  15. M

    Swing Cylinder Packing Gland removal

    You can see the metal collar inside the packing gland cap. The 5 piece packing gland is underneath that.
  16. M

    Swing Cylinder Packing Gland removal

    1963 Ford 4140 heavy duty Industrial tractor backhoe loader. Backhoe 723, model 19-299. Hello, I recently fixed a leaking loader manifold and my first thought was where is the next weakest component going to leak. It didn't take long to find out. After fixing the loader manifold, I operated...
  17. M

    1963 4140 - Loader Hydraulic manifold leaks!

    I bought the tractor last June. I got everything up there in my 1984 Ford Bronco 351 Windsor. I removed the hardtop and took out the back seats so it was like a pickup truck. I rebuilt the Bronco and did the bodywork too. It has great 4wd.
  18. M

    1963 4140 - Loader Hydraulic manifold leaks!

    I bought the tractor last June. I got everything up there in my 1984 Ford Bronco 351 Windsor. I removed the hardtop and took out the back seats so it was like a pickup truck. I rebuilt the Bronco and did the bodywork too. It has great 4wd.
  19. M

    1963 4140 - Loader Hydraulic manifold leaks!

    My off grid home and view... I built this in 2018 then sold my big house. Yeah, age is catching up. Maintaining the half mile driveway can be physically demanding when the plow truck gets stuck. I also have to clean off the solar panels after a snow storm or bring out the generator to charge...
  20. M

    1963 4140 - Loader Hydraulic manifold leaks!

    I finally have fixed the leaks at the loader hydraulic manifold. The new fittings were half the problem. I still had leaks coming from the lift check valves positioned between the port fittings. I removed the entire manifold and disassembled it. There are 2 o-rings and 2 special washers per...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top