(800) 853-2651
SHOP NOW

Search results

  1. Sbird

    Anyone know anything about electric golfcart modifications?

    Yep, buggiesgonewild.com is what you seek. My "farm cart" does in the low 30's.
  2. Sbird

    Shotgun barrel question - Ithaca Model 37

    Love me some M37's. Two of these I bought cheap in need of repair, the incorrect duckbill choke was a lot of work, I've never seen a gun with internal parts so worn. The counterfeit Nam era trench gun was a beautiful '62 30" that I bought for this project.
  3. Sbird

    What is this truck??

    40 some years ago there was a fleet of trucks local to me with similar beds/boxes. They where a oil well logging outfit that sent radioactive devices down a well being drilled to "map" the area around the hole.
  4. Sbird

    Off Topic Which Side For Woven Wire Fencing?

    Your side if they're wood post and you bush hog along it. I tend to occasionally snag the post on my side.
  5. Sbird

    Peter Wright anvil

    If it's in good shape it's worth at least $5 a pound. You'll have no problem selling it as items for the smithy are hot. Teehee
  6. Sbird

    bulk tank ground ?

    My 100 barrel oil well tank has to be grounded by law/regs. A tanker driver died a few years back from static lighting the gas fumes.
  7. Sbird

    Pulling a baler

    Is trailering it not a option?
  8. Sbird

    Signs of the times 9/25

    Yep me too, Tetley black and green with honey every morning.
  9. Sbird

    Sometimes you need Rear Ballast

    Caption this? "A good woman can bring balance to your life." Yes I stole that.
  10. Sbird

    Brillion Seeder for Pelletized Lime

    The 8 foot Brillion I use to rent was messed up once when I went to pick it up. The guy before me had put granular fertilizer in either the fine seed box or the larger box and ran seed in the other, I don't recall which but it was half tore up. I needed the working half so they let me rent it to...
  11. Sbird

    Ford manure spreader

    Resurrecting a older thread for any help with this ole Ford turd hearse. When I bought it years ago I was told it was a 20-17 and 120 bushel. There's no serial number tag on it but by the box dimensions it's a 130 bushel in the specs above. My owners manual doesn't list specs but doing the math...
  12. Sbird

    Signs of the times 7/28

    Get the mugs and vanilla ice cream out.
  13. Sbird

    What brand of pants/bibs do you wear?

    Levi's 505's to work where I mostly sit at a bench, only jeans I've found to fit. Big Smith bibs around the farm if shorts aren't practical. I need a seamstress to make the Big S bibs into shorts, the pockets are perfect for me and all I carry.
  14. Sbird

    Advice Needed: Buying a Tracked Dozer with Winch for 60 Acres - Budget Under $15k

    Three times I've hired a portable band mill to cut my logs off the property for barns and such, over 5000 board feet each time. Most of the skidding was done with a 50 plus HP tractor, a Cat ll draw bar across the lower links with a set of skidding tongs on a clevis and a couple chain hooks on a...
  15. Sbird

    706 Gas electrical problem

    One of my IH 606's (gas) falls on it's face at times, it's got junk in the tank that blocks the fuel. I blow in the line where it hooks to the carb and get back to work.
  16. Sbird

    Land Pride ZTR Mower

    I had a ZTR 52" that I bought used maybe 10 years ago, the dealer told me it was light commercial. 18HP IIRC and was easy on gas. The only problem I had was the plastic belt pulleys would need replaced at times. Lap bars don't work well on my steep hills so I run a Cub ProZ 700S (steering wheel)...
  17. Sbird

    hydraulic hoses torn up by pto

    I struggle with the rope used to start tying round bales, turn right it's to loose and turn left it's to tight. Got to find the sweet spot. A tight rope would be a challenge. To keep hydraulic lines up I use 2 or 3' bungees wrapped around the lines midway and pulled tight to the back of the...
  18. Sbird

    Proper name.

    Eye nut.
  19. Sbird

    Long 360 4wd front tire size

    OP I have a Long 2510DTC, it's been a good utility tractor needing few repairs. I've heard they're unsupported for major parts and being metric Ford parts won't interchange. Someone correct me please if I'm wrong. Just a FYI.
  20. Sbird

    8000 Ford hydraulic diagnosis

    Is there such a thing as a PTO load tester? If so the local shop may loan it out. A full round baler would be the hardest I could hit it with and it worries me to run it as bad as the noise is. I'll call this plan A, thanks.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top