-
1
Ford 2000 Tractor
Is it a three cyl or four cyl? Gas or diesel?- 1sarge
- Post #5
- Forum: Tractor & Farm Talk
-
1
Help with 2000 3 cyl coolant loss
Thanks Sean, we did fill it almost full. After letting it run for a while it is just above the tubes. We may run it some more tomorrow and she what happens. -
1
Help with 2000 3 cyl coolant loss
Helping friend on his 2000 3 cyl that is pushing coolant out the overflow. He believes the tractor was ran hot while loaned to a family member. After the tractor was returned to him he noticed that it was losing coolant out the overflow. He removed the head and it appeared to have a blown head... -
1
Ferguson D-PO-10
Try that online auction site, ——bay. Also search Lincoln Ag Products, they may have them but won’t be cheap.- 1sarge
- Post #2
- Forum: Tractor & Farm Talk
-
1
Help getting right starter solenoid
Thanks for all the help. I will probably order the one from this site. I was needing the tractor tomorrow so I went back out to the shop tonight, drilled the rivets out of my old one and found that it was corroded so bad it was not making contact with the posts inside. Cleaned it up and used... -
1
Help getting right starter solenoid
I am trying to find the correct starter solenoid for my 2000 4 cylinder. I have ordered two so far that have been the wrong ones. Just went to local CarQuest and got another wrong one. The part number I am finding on the New Holland parts site is 311006 for 12V and 311007 for 6V. The parts guy... -
1
front axle pin questions
I just replaced the bushing and pin on my 2000 4 cylinder which uses the same pin and bushing. Ordered both from this site and very disappointed with the fit. Im also not sure but I thought the fit should be better than it is. Maybe someone with more experience with them will chime in. -
1
Follow up to Help with 134 Engine
I ask for help the other day on a 134 engine I had just rebuilt. I was not getting oil to the rocker arms while priming the pump. Was told that the oil went through a hole in the cam and therefore had to be lined up. Just got to where I could start the engine a few minutes ago and all is good... -
1
Need Help with 134 Engine
Thanks for the help. Oil path through the cam explains it. Hopefully tomorrow I can line it up and make it work. If not, I may Oil up the rocker arms good and go ahead and start it. -
1
Need Help with 134 Engine
I just rebuilt a 134 engine and am trying to prime the oil pump with a drill before starting. I am getting about 10 lbs of pressure on the gauge but not getting any oil to the rocker arm through the supply tube. Should I not be getting more pressure on the gauge and oil to the rocker arm? I did... -
1
Ford 134 timing cover question
I am doing an engine swap on my 2000 4 cyl. The engine I am using is an older engine I believe from a 600 or 601. This engine has the old type governor with the two piece timing cover. I was going to use the newer governor off my original engine and the one piece cover but I found a small crack... -
1
MS Valley Flywheelers Show
We shot a 70lb anvil. Would estimate it reached 100 and landed a few feet from launch site.- 1sarge
- Post #1
- Forum: Tractor & Farm Talk
-
1
MS Valley Flywheelers Show
You missed a good one Grandpa, I think probably biggest show we have had in years. We have two a year, another in the fall, maybe you can make it then with a couple of off colored Bs.- 1sarge
- Post #1
- Forum: Tractor & Farm Talk
-
1
MS Valley Flywheelers Show
Very good show yesterday and today at the Spring MS Valley Flywheelers show in Houston, MS. Weather was greet, very good turnout as far as people, tractors and flywheel engines. Many vendors, tractor pull, good food, good music and even an anvil shoot. A couple of pictures if it works. My...- 1sarge
- Thread
- Replies: 8
- Forum: Tractor & Farm Talk
-
1
New tractor
Nice, Sure is a step up from the loader you sent down the road the other day.- 1sarge
- Post #1
- Forum: Tractor & Farm Talk
-
1
Good bye UPDATE rant
I have also meet and had dealing with Grandpa and his family. I also agree with what Gene said about them being honest and committed to doing the right thing. I am sure that he was honest in the deal in question and did make the buyer aware of the tractors problems. Grandpa, just keep on doing...- 1sarge
- Post #1
- Forum: Tractor & Farm Talk
-
1
Cubs in Saltillo Tracy Brown UPDATE
Let me know when you are going to come get them. I need a couple things Tracy might have and been thinking about going over. Might do it the same day.- 1sarge
- Post #1
- Forum: Tractor & Farm Talk
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy