(800) 853-2651
SHOP NOW

Search results

  1. C

    Case SC Oil Bath Air Cleaner Reservoir Repair

    I thought about buying some fuel tank sealer.
  2. C

    Case SC Oil Bath Air Cleaner Reservoir Repair

    I have holes in the oil bath reservoir that I have tried patching with jb weld, but they still seep oil. I'm thinking about lining the inside of the bowl with aluminum foil and glueing it in place. What do you think? Any better ideas?
  3. C

    The cheapest way that I have found to remove fuel tank varnish.

    The tractor had been parked for over 20 years and had a pretty thick buildup of varnish in the bottom of the fuel tank. I purchased some E85 flex fuel which was listed as 50 to 80 percent ethanol and added it to the empty tank It took 4 or 5 days for the fuel to dissolve the varnish. I had...
  4. C

    Farmall 140 Question

    Is it the same curved drawbar that fits the Super A?
  5. C

    Farmall 140 Question

    A friend of mine wants to sell me his Farmall 140. It has a fast hitch and a grader blade mounted to the front of it. Will this same blade mount under the belly of the tractor? The main reason that I would like to have the tractor is for grading my driveway.
  6. C

    49 Farmall H dies after a few minutes or after 30 yards quicker under load

    I have those see-through type plastic in-line fuel filters on most of my tractors and haven't had any issues.
  7. C

    JD "B" Tire Size?

    Thanks for the replys. There wasn't much left of the tires on the tractor and I didn't see a size.
  8. C

    JD "B" Tire Size?

    I'm guessing this tractor is an early 50's model. I couldn't read the serial number.
  9. C

    JD "B" Tire Size?

    Did John Deere change the rear tire size from 36 inch to 38 inch on the later model B's? I was looking at one the other day which had a steel frame, hydraulics, and roll-a-matic front that I thought had 38's on it.
  10. C

    Ever Use a McCormick Model 42 Combine?

    I think the 42R has the grain bin, right?. This is a 42 with a bagger shoot and platform.
  11. C

    Ever Use a McCormick Model 42 Combine?

    I have a Model 42 Combine that my dad bought and we never used it. I wouldn't mind getting it operational again, but I was wondering how well they perform.
  12. C

    Any experience with a New Holland Model 310 Square Baler?

    I see a Model 310 New Holland square baler at an On-line Auction. The bid price is up to $230. I was wondering if this is a dependable baler? Stored inside and looks to be in good condition.
  13. C

    Are Brass Battery Terminal Connectors Better?

    I saw some brass battery post connectors on Amazon and wondered if I should switch to those or continue using the conventional ones. Amazon.com: 2PCS Positive & Negative Battery Terminal Connectors,Brass Battery Cable Ends for Automotive Replacement Battery Terminals & Ends,Universal Battery...
  14. C

    IH Sickle Bar Mower Identfication

    Is this the mower that fits a Farmall C or Super C? It's not one for a Farmall H or M, right?
  15. C

    Which Mower to Buy?

    It seems like that mower would still be easier to mount than the mounted mower one that clamps to the tractor axle housing.
  16. C

    Which Mower to Buy?

    For the semi-mount mower, I will either have to attach a lifting rod to the rock shaft unit or install a hydraulic remote to use a lifting cylinder. I saw a video on Youtube showing how to add a hydraulic remote to a Farmall C or Super C.
  17. C

    Can A 3-Point Hitch Implement be Attatched to a Tractor With Only A Drawbar?

    The offset PTO on the Farmall A is also going to be a problem for a rea mower. It may put the PTO shaft in a bind. They made a mid-mount sickle bar mower for the Farmall A that had a hand lever for lifting. Some tractors were equipped with a lift cylinder that worked off the engine manifold...
  18. C

    Which Mower to Buy?

    I want to purchase a rear sickle bar mower for my Farmall Super C. It does not have a fast hitch. I'm trying to decide if I would be better off with one that clamps to the axle or a semi-mount one with a wheel that bolts to the drawbar. I won't be leaving the mower on the tractor full time...
  19. C

    McCormick Deering Grinder? What is it?

    Thanks. I saw it on an on-line auction. It's located in Marion, VA.
  20. C

    McCormick Deering Grinder? What is it?

Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top