Search results

  1. W

    35x hydraulic pump and lift cylinder

    thanks very much, george
  2. W

    35x hydraulic pump and lift cylinder

    Hello, having searched and found conflicting info, I am asking for help. My long-time local massey dealer had an old mechanic who I would pay $10 per question. He loved answering questions. Unfortunately he died last year. I hope you guys can replace him. My first question : Regarding...
  3. W

    Holding up an FEL

    Keys go in pocket of guy on loader.
  4. W

    Any Massey Mid mount cultivator setups out there?

    thanks bart, great pic, great tractors, I love them, quite a few high arches but so few mid mounts. thanks again, george
  5. W

    Any Massey Mid mount cultivator setups out there?

    I have seen lots of IH and JD mid mount cultivator setups for row crops, 4 and 6 row. I know massey made high arch 50's, 65's, 165's but I have found very few pics of mid mount setups. Anyone ever see any for sale? I do a lot of cultivating, just curious if any are still out there...
  6. W

    massey features, thanks everyone, new feature?

    Last week, I sent in some pics of features common on Massey tractors and you guys helped me figure them out. Here is one I may have figured out by my own self. The two holes in the back of the seat. Who knew they were there for a reason. Manual planter market arm trip release. Am I correct...
  7. W

    Massey 65 features I do not know, please help explain

    Thanks everyone, helped me solve some mysteries, thanks
  8. W

    Massey 65 features I do not know, please help explain

    Hello, on my massey 65 there are a few things I do not understand what they do and how to take advantage of them. The first pic refers to the three tangs located just below the top link. The second refers to the lower link hydraulic actuating arms. There is a tang on the bottom of the hinge...
  9. W

    long distance pto drive wheel? crazy?

    Thank you everyone for your input, some good things to think about. Sorry for whoever that idiot was who said I was selfish for even driving on the road. Distance is one thing, but with borders, having truckers stop at one side, unload, find someone to drive the tractor across to a truck...
  10. W

    long distance pto drive wheel? crazy?

    I occasionally see tractors at auctions far away from me. Transporting can be tough over long distances and borders. I have seen neighbours buy newer high speed tractors far away and simply fly there and drive them home. The craziest was 1000 miles. Yes, tires wear. But sometimes...
  11. W

    3 cyl perkins very low oil pressure, desperate

    Thanks charles, I blew through both of them and they seemed perfectly clear. The calipers could be wrong I suppose, but the plastiguage is always right on I believe, I don't think it can be wrong, but I stand to be corrected. The bearings seem to fit perfectly as well. I went to the premiere...
  12. W

    3 cyl perkins very low oil pressure, desperate

    I rebuilt my massey 35 3cyl perkins. Full kit. crank turned, undersize bearings. Plastiguaged right on the tight side of the tollerances. Now have tried two new oil pumps. Relief valve checked and I slightly stretched the spring. No difference. I get 5 psi at idle and 10 at 1500 rpm. Before...
  13. W

    massey 35 perkins rebuild problem- discouraged

    There was one comment above, I have confirmed all measurements and also plastiguaged, all are perfect, did not check the back main because of the seal, but the other three were right on the tight side of the tollerances. I pulled the pan, third time today, replaced the oil pump with another...
  14. W

    massey 35 perkins rebuild problem- discouraged

    Just an update, took the pump off, measured to spec. Poured lots of oil down from head. Ran motor again, same problem. Have oil at the cam inlet, just drips getting up to the rocker shaft. Essentially no oil to the head. Because the guage still says 5 and 10 psi, assuming the pressure is the...
  15. W

    Trying to put engine back in 165?

    Just went through this on my 35 with dual clutch. Make some exact measurements to know which spline and or pilot bearing is lining up first. The vice grip the pto on both sides so it won't move. Put transmission in tallest gear, 4th high? Get some longer engine mounting bolts, about 2 inches...
  16. W

    massey 35 perkins rebuild problem- discouraged

    I did the plastiguage on all the big ends and the front three mains. Did not do the back because of the seal. All was perfect to spec, roughly all 0.002" My local mechanic said that perhaps I did not let it run long enough to fill the galleries and cam shaft. blew through the oil filtre...
  17. W

    massey 35 perkins rebuild problem- discouraged

    I just finished rebuilding my massey 35 3 cyl perkins. Use the tractor every day, been toughest two weeks ever. I did a full rebuild and clutch. All went well, no extra parts, started well, sounds good. Very low oil pressure. Changed to a new guage, same reading. I had 40 psi at idle and 60...
  18. W

    grain cleaner

    mine says 200 rpm on the bottom side board, mine is electric but plan to convert to pto and make it mobile. keep in touch, george
  19. W

    grain cleaner

    mine says 200 rpm on the bottom side board, mine is electric but plan to convert to pto and make it mobile. keep in touch, george
  20. W

    small scale dehuller

    i was operating a 540 massey combine and yes it even had a separate rethresher liked you mentioned. I opened it up and looked like a small cylinder, with 6 inch rasp bars, did not notice any adjustments to tighten or loosen the rethreshing. I have had good luck with a scarefire dehuller, works...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top