(800) 853-2651
SHOP NOW

Search results

  1. O

    Quick-Tach on a 620

    I actually don't use the rod anymore, I put a bungee cord over top of the pins on the hitch/3pt arms and leave a little slack in the lower turnbuckles. When I back up to an implement 9 times out of 10 its close enough where the 3pt arms open up and then all I have to do is raise them up to...
  2. O

    Quick-Tach on a 620

    One issue with the quick attaches are if your implements are not the same width they will not fit the quick attach. If they are you're in good shape give it a try. I use PATs quick attach arms on my compact tractor because all of my implements are different widths.
  3. O

    12V battery pack if car battery is absent?

    I have used a battery pack in lieu of a battery for quick starts and diagnosing some of our old junk. I have a Jump and Carry JNC770R. Its lightweight enough, has a carry handle and works just fine. $150 sometimes cheaper on Amazon.
  4. O

    Manual fuel shutoff on 630

    Thanks, great resource.
  5. O

    Manual fuel shutoff on 630

    My thought was to add the manual shutoff directly to the tank and the auto shutoff below that.
  6. O

    Manual fuel shutoff on 630

    I'm working through some issues on my 630 and have to rebuild the auto shutoff sediment bowl. The diaphragm's failed and fuel leaked into the crankcase as many others have experienced. I don't really want to change out to a manual sediment assembly like from an A or similar machine, but I did...
  7. O

    Fuel filter in sediment bowl on H?

    The screen is properly installed and there is a new screen in the inlet of the carb.
  8. O

    Fuel filter in sediment bowl on H?

    I'm sorry, yes there is a screen in the sediment bowl.
  9. O

    Fuel filter in sediment bowl on H?

    Thanks for the suggestions. The tractor was completely restored 4 years ago which included a tank liner due to some rusting that had occurred. After restoration I put some fuel in there with no stabilizer (I know not very smart) and the tractor sat for a year or so. I've since cleaned the...
  10. O

    Fuel filter in sediment bowl on H?

    I have a 54 super h and unfortunately don't use it as much as I should, because of this I've had some fuel breakdown issues and had to flush the carb a few times to remove sediment. Does anyone run a fuel filter inside of their sediment bowl? I've seen this a few times at the county fair with...
  11. O

    Which Stihl chainsaw

    I just recently shopped around for a mid range saw and considered both the MS250 and MS290. I considered myself to be a Sthil only guy but after looking hard at the MS250 and MS290 I ended up and bought a Husky 346XP. Granted it was more money than both of those but it won hands down on power...
  12. O

    Stihl 026

    Based off responses it seems the 026 is a good saw for firewood, does the price seem fair?
  13. O

    Stihl 026

    I'm looking for some honest opinions about a used Stihl 026. Found one locally for $200 with a 20" bar and 2 extra chains, it appears to be in good shape and has compression around 150psi. Is this a fair price for a used saw? I'd be using it for firewood and other general cleanup around the...
  14. O

    Will 450 drawbar fit an H

    I was talking about the swinging drawbar.
  15. O

    Will 450 drawbar fit an H

    Found a 450 drawbar online and was hoping it would fit my 54 Super H, will it fit?
  16. O

    decals and wireing harness

    I bought vinyl decals from Maple Hunter, great service and pricing. THe owner even worked for IH years ago. Wiring harness from OEMtractorparts. Very happy with both of them.
  17. O

    Which fuel tank sealer/liner to use?

    I used a kit from Eastwood Company on my Super H, it worked very well.
  18. O

    Farmall Cub Hydraulic Help

    I tried cycling the lever back and fourth with no luck. The oil level should be about 1.5" high and just drip out of the set screw on the LH side right?
  19. O

    Farmall Cub Hydraulic Help

    Having some issues with the hydraulics on my 48 cub, when you move the lever they don't do anything at all. This tractor is fairly new to me and runs great. I checked and the fluid was low when I first got it, do I need to bleed the system before it will work?
  20. O

    48 Cub Governor problem

    I am having some issues with my 48 cub and its throttle response. I have gone through the carb and have it set to factory settings. I read on this forum about a common issue with the horizontal rockshaft where it inserts into the housing and the shaft/key wearing out, I found on mine there was...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top