(800) 853-2651
SHOP NOW

Search results

  1. T

    FARMHAND 30 loader legs on MF175

    I need to know the length of the legs for a FARMHAND #30 loader mounted on a MF175 tractor. Have the loader mounted but the legs were not with the loader when purchased. Thought someone here may have a similar setup. I can fabricate the legs but would be nice not to guess at the proper length...
  2. T

    MF175 with Aux Hydraulic control adding Loader Spool

    Was hoping to leave the aux valve I have in place. And tap constant pumping pressure to feed spool valves on loader.
  3. T

    MF175 with Aux Hydraulic control adding Loader Spool

    I have a MF175 with the Aux hydraulic control pictured below seat, between your legs when seated on tractor. I need to add hooks ups for a Farm Hand loader with center open spool on it. This will be connected by quick couplers. My question is where do I tap into the existing system to get...
  4. T

    MF175 mount for FarmHand #30 loader

    Hope this is good for the Forum. I have a MF175 and a FarmHand #30 loader than came off of a MF165. Have the mount for the MF165 which does not seem to mate up with the 175. Any source of the proper mount or information on modifying the mount I have. Thanks in advance for any help with this.
  5. T

    Yanmar YM1510D Need to move it with no power (Tow it)

    Thanks. That is what I was thinking.
  6. T

    Yanmar YM1510D Need to move it with no power (Tow it)

    Do I need to disengage the hydro drive before pulling with another tractor. Unit will not start and is in gear. If so, where is the bypass?
  7. T

    YM1510D Bubbles in coolant overflow tank

    Got a new head and valve cover gasket and going to change those out. What should head bolts be torqued to, also the smaller bolts on head?
  8. T

    YM1510D Bubbles in coolant overflow tank

    <QUOTE author="Crump"><s> /e></QUOTE> So, did you end up having to have the head worked? What was the end result? Thanks, Tom
  9. T

    YM1510D Bubbles in coolant overflow tank

    Yes it did overheat. Not a lot of bubbles but a steady flow. Would this cause it to blow out excessive amount of coolant? As in overflowing catch bottle. Thanks, Tom
  10. T

    YM1510D Bubbles in coolant overflow tank

    Getting a steady flow of bubbles from radiator into coolant overflow tank and pushing out an excessive amount of water. Have replaced the radiator cap with a 7psi cap. What should I try? Thanks, Tom
  11. T

    YM1510D PowerShift hard to go into reverse

    Placed a flat washer between the shifter gate and housing on each of the 2 bolts at the reverse end and it seems to be much better.
  12. T

    No reverse in my 1510d even after fluid change

    I am having a similar problem that I have to shift into reverse several times before it will actually work. My shifter has a definite grove in it where the plate is and have wondered if a file. take a little off the plate so the shifter can come back another 1/8th inch, is the answer or if I...
  13. T

    YM1510D PowerShift hard to go into reverse

    Hi All, New to the group and just purchased a YM1510D. The PowerShift is stubborn about going into reverse. Sometimes will have to shift back to neutral then reverse a couple or three times before reverse will engage. High, mid, low range all behave this way. Any suggestions about where to...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top