Search results

  1. H

    Massey Ferguson 165 engine issue

    I am by no means an expert on these tractors, and don?t claim to be. But years ago I had a pickup truck that I bought from a used car dealer (30 day warranty) and after the first oil change the low oil pressure light started coming on at idle. Long story short I didn?t have the money for a...
  2. H

    Lift Arm Hydraulic Problem On A 135

    David- Thank you very much for your reply. I will do as you have instructed, however I probably won't be able to work on the tractor until early next week at the earliest. I'll post the test results as soon as I can get to the tractor. Thanks again for your help. Tim
  3. H

    Lift Arm Hydraulic Problem On A 135

    I have a 1965 gas 135 with a loader installed on the front and I'm trying to work out problems with the hydraulic system. I bought the tractor a few years ago and the rear lift arm and bucket hydraulics have never really worked properly since I bought the tractor. The tractor itself seems to...
  4. H

    Adding An Auxiliary Hydraulic Pump To The Front Of A Gas MF1

    Ok thanks. Sounds like more trouble and work than the old tractor is worth. As I posted in my reply to ptfarmer, I bet I may be able to get some better performance out of the loader by sorting out some of the poor performance in the three point lift system. I'm currently trying to figure out...
  5. H

    Adding An Auxiliary Hydraulic Pump To The Front Of A Gas MF1

    I have the 4 cylinder engine, and to me the axle appears to be the swept back style.
  6. H

    Adding An Auxiliary Hydraulic Pump To The Front Of A Gas MF1

    Ugh. Unfortunately, that's mostly what I use the tractor for is mowing around a field that I rent out to my farmer neighbor next-door. Sound's like I may be stuck. I may be able to get better performance out of the stock system, since the lift arms for the three-point don't seem to be working...
  7. H

    Adding An Auxiliary Hydraulic Pump To The Front Of A Gas MF1

    Jim- I'm just curious what would make it worse? If I put an 11 or 14 GPM belt driven pump on (if it's even possible) what would make it worse? Would it take too much power from the engine, to run that pump?
  8. H

    Adding An Auxiliary Hydraulic Pump To The Front Of A Gas MF1

    Hello everyone. I have an old gas MF135 with a Great Bend FEL on it. Currently the FEL runs off of a diverter valve from the 3-point hydraulic system. I'm not very happy with this setup and this is the way that the tractor was setup when I bought it a few years ago. The loader hydraulics are...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top