Search results

  1. 1

    John Deere 3020 synchro-range

    WTW ran the Deere for several hours and when I was putting it away; the selector locked up and I did as you said and it immediately shifted like normal. How long do I have before it is splitting and installing a clutch. What kind of money am I looking to spend to put a clutch in the old girl?
  2. 1

    John Deere 3020 synchro-range

    Is it possible the new latch is the problem? The quadrants are worn and the new latch is not working with the quadrant. Will install the old latch tomorrow. What is the proper position for the latch? In the picture below is the latch in proper position?
  3. 1

    John Deere 3020 synchro-range

    Range quadrant works perfect. But the gear quadrant refuses to move even with the upper transmission rod disconnect from the quadrant. What is wrong? Is it possible that the quadrant for shifting is bad?
  4. 1

    John Deere 3020 synchro-range

    Thank you John I am grabbing at straws. It only does it when working it with the loader. Engine temperature is normal. And when it locks up nothing get it to go into the gears until tomorrow morning when it cools off. Old timer said it is in the transmission. I am not going to spend any more...
  5. 1

    John Deere 3020 synchro-range

    Yes and it makes no difference. When it happens range and gears are locked in place. No matter what I do, nothing works until completely cooled down. Then range and gear shift like new. I have went under the old girl and try to move either lever at transmission and will not budge. Prior to the...
  6. 1

    John Deere 3020 synchro-range

    Nothing looking wrong here to me?
  7. 1

    John Deere 3020 synchro-range

    This morning range and gears all work like nothing is wrong. I am really lost of where to go next. Appreciate all the help with this problem. I don't think it is lever adjustment at turn buckle . But I have ran into a road block.
  8. 1

    John Deere 3020 synchro-range

    The lever is not able to move up or down in ranges. I will check it this morning and see if anything changed after the tractor cooled off. I am totally baffled unless I see something in the quadrant
  9. 1

    John Deere 3020 synchro-range

    I am not disputing the clutch as a possible problem. I will remove bottom cover and take some pictures of the clutch. I could very well have multiple things going on. I do think it is odd that the shift problem always occurs after working the old girl in back and forth when it is hot. I mean...
  10. 1

    John Deere 3020 synchro-range

    I did run the engine the whole time it was towed. I will take it apart tomorrow. I am beginning to get little upset with Mr Deere. All the parts for rebuilding the transmission selector for John Deere was over $250. Is that a problem with John Deere 3020 row crop tractors? It has 3400 hours but...
  11. 1

    John Deere 3020 synchro-range

    Lucky for towing it was locked into towing if that means anything.
  12. 1

    John Deere 3020 synchro-range

    Short lived repair. I was working the tractor and all the gear selections forward and back were working fine until Shifted into road gear. I was unable to get into road gear or any other gear. The handle would not move. my neighbor drove the Deere and aI pulled it back to the farm with my...
  13. 1

    John Deere 3020 synchro-range

    I have the quadrant rebuilt to include wear parts and it was the quadrant not the clutch or transmission
  14. 1

    John Deere 3020 synchro-range

    I am going to rebuild the quadrant and see if I have the same problem as before. I have all the wear parts from Deere. I feel that is where the problem is located. If I spray WD40 down in the quadrant it works fine for awhile.
  15. 1

    John Deere 3020 synchro-range

    Can one inspect the clutch by removing bottom cover?
  16. 1

    John Deere 3020 synchro-range

    I have no problem with creeping, When it is hot you are unable to shift anywhere in quadrant.
  17. 1

    John Deere 3020 synchro-range

    I have a 3020 synchro range that shifts into all gear detents when it is cold but after running for 1/2 hour it become hard to impossible to shift into different gears, Where should I start. Is it in the transmission or the synchro-range. I would also like to know how to adjust the shift rod to...
  18. 1

    MF 1085 power steering reservoir

    Thank you for all your help. I just purchased a MF 1085 tractor and the power steering reservoir is low. I order a manual but want to address it now. How full do I fill it? Looks like dextran( Red) just small amount in the bottom of reservoir.
  19. 1

    Massey model 50 fuse location

    Thank you for all the suggestions. I found the problem was the starter cable was touching the case when tighten down. And a defective battery ground cable. It was a real pain. But I thank everyone John
  20. 1

    Massey model 50 fuse location

    I am troubleshooting a gas Massey model50 that is giving me a head ache. I replace solenoid, push button and had starter tested. I had power to neutral switch until I tried bypassing it.Now I have no power not even the headlights that I had before arching neutral switch. I have searched...

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top