Search results

  1. E

    Naa Governor

    Thanks, I looked up this metal and looks like it will be good for this. I ordered a foot of it from McMaster Carr.
  2. E

    Naa Governor

    I am replacing the seals in the governor cover. The needle bearings have worn into the shaft. I wish I could just but a new shaft but not having any luck finding much of anything about the NAA Governor. I checked the shaft for hardness with a file and it appears the shaft is not hardened. Can...
  3. E

    NAA Engine Rebuild

    Thanks. I’ll give them a call.
  4. E

    NAA Engine Rebuild

    I wish there was a customer service number for Tisco. If there is one I can’t find it. I think I have so much invested in time and fortune at this point I will just go ahead and pull one out to see.
  5. E

    NAA Engine Rebuild

    I’m not the most experienced motor rebuilder but decided to buy Tisco rebuild kit with sleeves pistons valves etc. it went fairly well Almost! Now that it’s done I noticed the old pistons have an offset wrist pin hole. Any one know which way the Tisco pistons go. The pistons are stamped on top...
  6. E

    Rear wheel

    Location, location, location!
  7. E

    Rear wheel

    Just outside Savannah Ga
  8. E

    Rear wheel

    I've tried to find used rims but slim picken around here and I definitely wouldn't buy used online. I think pomester has a good idea supporting the local guy if in reason, if not the other suggestions here are appreciated .
  9. E

    Rear wheel

    Rear wheel (rim 6 loop) on my Jubilee is rotted out. The tire size is 12.4-28. Looking on line, prices are anywhere from $150 to $450. I have always said "you get what you pay for" but I'm not sure that adage always applies these days. Have you any suggestions on how to identify a suitable rim...
  10. E

    Ford Jubilee Hood with raised lettering

    I learn something every day. Thanks for your input!
  11. E

    Ford Jubilee Hood with raised lettering

    the fenders might have been changed at some point but as you can see there is no logo or bulge on these. I will put the set with the raised logo on my restoration project and these will suffice for my worker. Still leaves a question regarding the origin of this hood shown below.
  12. E

    Ford Jubilee Hood with raised lettering

    I Have two NAA tractors, one that gets abused and one that I have been restoring for the last several years. One has a hood without lettering and one with raised lettering. They both look like oe or at least look 70 years old. I can't find any history where Ford provided the hoods one way or the...
  13. E

    Safety Instructions For Paint Hardner Sold on This Side

    I've been told that harder is very bad for you. I have some respiratory issues so I bought an air supply system. It works great. I put it on before I mix and take it off after my paint gun is clean and I never smell the paint. For the money this unit is excellent. Rather safe than sorry...
  14. E

    Fixing paint job

    I also went through the same trials learning to paint, still not any kind of pro but I did learn a few things. A rough dry looking finish is usually from using too small a nozzle and maybe too much pressure.. If your using oil base paint the can will suggest the size you need. (1.3 @ 30psi most...
  15. E

    NAA P.T.O. front seal (NAA 799-A)

    To anyone that's interested in this thread, I received the new front pto seal today (D9NN703AA/D8NN703AA) from YT, It measured 2.444 and fit perfectly. Thanks everyone for help on this. By the way for $4.40 that's a pretty good deal!
  16. E

    NAA P.T.O. front seal (NAA 799-A)

    The SKF16189 shows 2.445 O.D. which would be a good fit. It will be interesting to see the actual size when I get the D8NN703AA from YT.
  17. E

    NAA P.T.O. front seal (NAA 799-A)

    I'll definitely report back after I receive the new seal. You got me nervous so I measured the bore and it is 2.42 and PN D8NN703AA sports 2.45 OD. so .008 is a lot to press. May not work.
  18. E

    NAA P.T.O. front seal (NAA 799-A)

    I ordered the new seal here at YTs. I has all the correct dimensions so I expect it will fit. PARTS FORD PTO Shaft Seal, Double Lip - For All Models- 1939 thru 1964 with 1-1\8 inch or 1-3\8 inch PTO shaft. 2.45 inch outside diameter, 1 5\8 inch inside diameter, 5\8 inches wide. Replaces OEM...
  19. E

    NAA P.T.O. front seal (NAA 799-A)

    thanks. You'd be surprised how much time I invested in this search. Much appreciated!
  20. E

    NAA P.T.O. front seal (NAA 799-A)

    Has anyone replaced this front pro seal? I have searched all over and can't seem to find any info on this number.

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top