51 A Rollomatic questions

[Mike(NEOhio)]

Have mine apart to service wheel bearings. I cleaned about a quart of old grease from the hubs and housing. After repacking the wheel bearings, how much grease should go into the center area of the hubs? Usually half full for automotive applications. Also, how should I pack the rollomatic gears. There was a lot of grease there too. This was FIL's tractor and I've been with it over 50 years and never seen it apart before.

 

[matthies]

I fill hubs completely full to keep condensation out. And would do the same with the ROM.

 

[Resting Relic]

Pack them full. Grease is cheap!