Im sure this gets asked alot and I apologize if it does however, I am new to tractor ownership but I am not new to the mechanics aspect. Was ASC certified years ago. We bought a 2010 and it had a few issues like surging and stalling out but would start right back up. Got it home cleaned the carb and it ran amazingly for about 15 minutes and it was like someone shut the key off. We got a new wiring harness, new electronic points, and condenser, rotor, cap, coil, new plug wires (suppression), new ignition switch, voltage regulator, and circuit breaker. (It was switched from positive to neg ground before we got it.) still has a generator which we polarized before starting. (Yes it does start now) But I have a draw and my gen and oil lights stay on after key is shut off, and sparks when i remove the ground. Now the oil light still works then gen light doesnt now.
Can anyone tell me which wires i placed in the wrong spot. Please and thank you.
Can anyone tell me which wires i placed in the wrong spot. Please and thank you.