LS 300 manure spreader.

Picked up a MM Ls 300 spreader last month. Going thru it to make it work again. Would somebody have a picture of the Right side where it drives the floor ? Have most the parts and will fabricate the rest once I can see it. Thanks in advance.
 
Picked up a MM Ls 300 spreader last month. Going thru it to make it work again. Would somebody have a picture of the Right side where it drives the floor ? Have most the parts and will fabricate the rest once I can see it. Thanks in advance.
There is one on a face book Moline group. I can't help and did not pay much attention to it. It may have been yours?
 
I can't figure out how to put pictures on here but if you'll contact me on Facebook messenger I'll be happy to send you the pages of the owner/assembly manual. John Grandfield
 
Agcopartsbook's not much help on that is it. I tried searching and all I can find under White material handling is loaders. I believe that was an Oliver spreader wasn't it? I know I had an MM spreader years ago that was an Oliver, but I don't remember the model of either one. It might have been an LS300, but it went to the scrapper a long time ago. The things we kick ourselves for now.
 
Agcopartsbook's not much help on that is it. I tried searching and all I can find under White material handling is loaders. I believe that was an Oliver spreader wasn't it? I know I had an MM spreader years ago that was an Oliver, but I don't remember the model of either one. It might have been an LS300, but it went to the scrapper a long time ago. The things we kick ourselves for now.
You could be right but there was one in the 1950's I thought was Moline not Oliver? Thought it was 300 model. Anyway, there is one on face book MM group they are having quite a chat over. I almost bought one years back would like to see them saved from scrap.
 
1742569339733.png
 
Agcopartsbook's not much help on that is it. I tried searching and all I can find under White material handling is loaders. I believe that was an Oliver spreader wasn't it? I know I had an MM spreader years ago that was an Oliver, but I don't remember the model of either one. It might have been an LS300, but it went to the scrapper a long time ago. The things we kick ourselves for now.
I threw up a picture below I also thought they only had that model for years. Kind of the only one maybe till the merger. Again, I could be wrong.
 
\


Not sure on this one its later model.



View attachment 107911
That's the one, except mine was a single axle. I remember I needed something for the gearbox on it about the time that White was forcing Oliver and MM dealers together. I went to the Oliver dealer and they had just gotten the microfiche films for the MM stuff. Ed had quite a time finding it. We didn't realize at the time that it was actually an Oliver spreader. If we had known that, things would have been a lot easier that day.
 
That's the one, except mine was a single axle. I remember I needed something for the gearbox on it about the time that White was forcing Oliver and MM dealers together. I went to the Oliver dealer and they had just gotten the microfiche films for the MM stuff. Ed had quite a time finding it. We didn't realize at the time that it was actually an Oliver spreader. If we had known that, things would have been a lot easier that day.
Ok besides the top one would look best behind your MM U!
 
Yes, that is an MM spreader. They were made by LH Schulz company and sold under the MM name. There was a model LO and an LO 135. I think Massey Ferguson might have had the same one sold under their name.
You mean the bottom picture?
 
This is the model that I had. If it wasn't an Oliver, I stand corrected. It won't be the first time I was wrong and for sure won't be the last.

I had a full list of the MM/Oliver crossovers, but I can't find it quick. I loaned it to an MM guy. I thought he gave it back, but I'm not sure. It might be in the truck.
 

Attachments

  • mmspreader.jpeg
    mmspreader.jpeg
    8.5 KB · Views: 14
This is the model that I had. If it wasn't an Oliver, I stand corrected. It won't be the first time I was wrong and for sure won't be the last.

I had a full list of the MM/Oliver crossovers, but I can't find it quick. I loaned it to an MM guy. I thought he gave it back, but I'm not sure. It might be in the truck.
RR I don't know much about them either. Worked on a few Deere, new idea, and probably a few others. I was not a dairy farmer just around it some when I was young. I too wonder if some company made them for others. rebranding as such. The top one is like I almost bought.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top