Hello all I'm some trouble with an Oliver 1800 and I'm hoping somebody can help me.

We pulled out the main shaft that runs from the back of the transmission to the engine and in the process the bearing slid out a little bit and now we can't get it back in. Is there any tricks to getting these back in? Any input would be greatly appreciated thank you
1000001792.jpg
1000001793.jpg
 
I am not familiar with that tractor, but look at the back of the plate that goes there. There might be a lip that will locate the bearing to the proper depth.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top