The pump failed, so I replaced it with a new one. The new one works great: excellent pressure now.
However, a new challenge has emerged. The lift arms descend at an unusually slow rate, forever if no weight is on them.
The Draft lever is fully down. The Position Control is in the down position (just above fast). They raise if I move the position lever to the response area (fast/slow).
I have tried many different positions on both controls with no luck getting the arms to move down faster.
I can lower the arms by releasing pressure from the ⅛” plug on the transfer cap.
While I believe the issue may be related to an adjustment, Which adjustment needs attention?
However, a new challenge has emerged. The lift arms descend at an unusually slow rate, forever if no weight is on them.
The Draft lever is fully down. The Position Control is in the down position (just above fast). They raise if I move the position lever to the response area (fast/slow).
I have tried many different positions on both controls with no luck getting the arms to move down faster.
I can lower the arms by releasing pressure from the ⅛” plug on the transfer cap.
While I believe the issue may be related to an adjustment, Which adjustment needs attention?