Yanmar 3110D missing some range gears and only crawls no 4th gear in 1-3 powershift

[bandre111-HT]

Good Morning,

I need some assistance with my 3110d. Changed clutch and 1-3 plus reverse on the powershift engages but tractor does not have enough power to move unless its jamed into a gear then it takes off. the gears are very difficult to find and do not hold. Sometimes it just stops and no gears/ranges work after 10 minutes. The PTO is working well.

 

[Janicholson]

Good Morning,

I need some assistance with my 3110d. Changed clutch and 1-3 plus reverse on the powershift engages but tractor does not have enough power to move unless its jamed into a gear then it takes off. the gears are very difficult to find and do not hold. Sometimes it just stops and no gears/ranges work after 10 minutes. The PTO is working well.

There is a Yanmar Forum GO to Forums (Bold Tag) and post there. Jim

 

[bandre111-HT]

Thank You.

 

[winston-HT]

 

[bandre111-HT]

Good Morning Winston,

Where can I check the main relief valve pressure with a gauge? What should be the correct pressure? Is this in the service manual?

Thank You.