Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case SC loosing power


 
Post new topic    
View previous topic :: View next topic  
Author Message
IHguy86
New User


Joined: 27 Aug 2019
Posts: 11


Report to Moderator

PostPosted: Wed Jun 09, 2021 6:36 am    Post subject: Case SC loosing power Reply to specific post Reply with quote

I'm having trouble with my case SC. When the PTO is engaged with a pull type brush cutter attached, and I begin going up a hill, I loose power and the engine stalls out. When traveling on level ground there is no issue. Furthermore I discovered a bird nest in my radiator, I believed I cleaned it all out but maybe believe this could be causing the issue.

Any help would be great!
 
Back to top
View user's profile
tomturkey
Tractor Expert


Joined: 21 Jul 2010
Posts: 2983


Report to Moderator

PostPosted: Wed Jun 09, 2021 10:55 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

In the radiator? or in front of the radiator? Matters not don't think that has any bearing the problem. I believe that your governor is not working as it should. Possibly some old hard grease limiting the movement inside. I've never been inside the gov on my SC. I have been into the ones on the DC and 400. Removed old hard grease and limbered up the movement on both. Or it couldbe much simpler and just need an adjustment of the spring tension. Someone a lot smarter/more knowledgeable than me will probably chime in. good luck. Luv the SC. gobble
 
Back to top
View user's profile
C.Amick
Long Time User


Joined: 30 Jan 2013
Posts: 1049


Report to Moderator

PostPosted: Wed Jun 09, 2021 3:41 pm    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

Have you mowed that hill with it in the past? What size brush cutter do you have and how thick is the grass? Does it also stall on the hill with no load? I have a 5 ft. brush cutter and on my SC and it chokes down in tall grass.
 
Back to top
View user's profile
Ron Sa
Long Time User


Joined: 13 Mar 2008
Posts: 727


Report to Moderator

PostPosted: Thu Jun 10, 2021 6:15 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

If the governor is the problem, when the tractor is lugged down a lot, lean to the left and observe if the butterfly on the carb is opened all the way.
 
Back to top
View user's profile
Ron Sa
Long Time User


Joined: 13 Mar 2008
Posts: 727


Report to Moderator

PostPosted: Thu Jun 10, 2021 7:02 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

PS You say the tractor stall out. Does the tractor sputter and die as if the fuel mixture is too lean or one or more spark plugs are bad? Or do all cylinders keep firing until it dies?
 
Back to top
View user's profile
flatpkr
Regular


Joined: 30 Jan 2018
Posts: 272


Report to Moderator

PostPosted: Fri Jun 11, 2021 3:01 pm    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

Im also guessing the governor is not working properly.
Jim
 
Back to top
View user's profile
IHguy86
New User


Joined: 27 Aug 2019
Posts: 11


Report to Moderator

PostPosted: Sat Jun 12, 2021 8:22 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

To be honest Im not sure!
 
Back to top
View user's profile
IHguy86
New User


Joined: 27 Aug 2019
Posts: 11


Report to Moderator

PostPosted: Sat Jun 12, 2021 8:23 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

It runs fine when traveling on level ground ground just when Im going up a hill with the PTO engaged.
 
Back to top
View user's profile
IHguy86
New User


Joined: 27 Aug 2019
Posts: 11


Report to Moderator

PostPosted: Sat Jun 12, 2021 8:24 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

I mowed with it last summer and had no issue it wasnt until this year that it started doing this. The mower I use is a 5 foot mower pull type.
 
Back to top
View user's profile
IHguy86
New User


Joined: 27 Aug 2019
Posts: 11


Report to Moderator

PostPosted: Sat Jun 12, 2021 8:26 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

The nest was inside of the radiator. I was waiting for a new To come in and in the meantime had shove the rag into the hall to keep critters like this from getting in however they had made their way into it. Ive sense put the proper cap on it and have no other issue with the radiator. So a video on YouTube with the guy was adjusting the governor Im going to try and check it out this week.
 
Back to top
View user's profile
Ron Sa
Long Time User


Joined: 13 Mar 2008
Posts: 727


Report to Moderator

PostPosted: Sat Jun 12, 2021 10:03 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

My questions were about when it is going up hill.
 
Back to top
View user's profile
fixerupper
Tractor Guru


Joined: 12 Oct 2003
Posts: 19430


Report to Moderator

PostPosted: Mon Jun 14, 2021 10:23 am    Post subject: Re: Case SC loosing power Reply to specific post Reply with quote

Just a wild guess here but is the float set too low or too high? Does it act lean and sputter and struggle and pop before it dies or does it belch black smoke and quit when you go up a hill? Or does it act like the switch was shut off? Could it be the battery slides back in the battery box and shorts the positive terminal. This would affect it only if it has a distributor conversion. Strange off the wall things like this can happen.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters