Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Ford 7700 hydraulic lever sticks


 
Post new topic    
View previous topic :: View next topic  
Author Message
illheader
New User


Joined: 19 Aug 2008
Posts: 19


Report to Moderator

PostPosted: Mon Jun 14, 2021 7:49 am    Post subject: Ford 7700 hydraulic lever sticks Reply to specific post Reply with quote

I was cutting hay with my ford the other day using new idea 5209. When I used my hydraulics to lower the mower the lever would
stick in I think float mode and could here it change sound in the pump area. Shut tractor off and then could pull level back to
home/middle position.
Any Ideas why this would stick or stay in forward/float position? I do have a multi port diverter on it as well if that makes a
difference.
THanks
Matt
 
Back to top
View user's profile
Fritz Maurer
Tractor Expert


Joined: 14 May 2011
Posts: 1769


Report to Moderator

PostPosted: Mon Jun 14, 2021 12:14 pm    Post subject: Re: Ford 7700 hydraulic lever sticks Reply to specific post Reply with quote

One thing that comes to mind is linkage between the lever and the valve. Make sure it isnt bent and/or binding. and see it is lubricated. It is actually supposed to stay in float when you push it that far, but if the lever is contacting the console, it could be stopping right at the threshold between float and lower, hence the pump noise. Adjust the linkage to move the lever from contacting console.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters