Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

M5


 
Post new topic    
View previous topic :: View next topic  
Author Message
pointrow
Regular


Joined: 27 Sep 2014
Posts: 43


Report to Moderator

PostPosted: Mon Jun 21, 2021 2:19 pm    Post subject: M5 Reply to specific post Reply with quote

Dumb question: where do I fill the hydraulic oil at. No obvious port that I can find.

Thanks

Pointrow
 
Back to top
View user's profile
shaun wallace
Tractor Guru


Joined: 11 May 2008
Posts: 4609


Report to Moderator

PostPosted: Mon Jun 21, 2021 2:38 pm    Post subject: Re: M5 Reply to specific post Reply with quote

Plate that is/was leaking with 2 levers. Fill to about 1 inch below top, put cover back on.
 
Back to top
View user's profile
shinnery
Tractor Guru


Joined: 18 Apr 2006
Posts: 3962
Location: Hawley, Texas

Report to Moderator

PostPosted: Mon Jun 21, 2021 5:23 pm    Post subject: Re: M5 Reply to specific post Reply with quote

At least by the time the M670s got here MM created an easier way. At the right rear corner of the hydraulic box there is a drain plug. The M670s came with a short nipple in the case and a tee on the nipple one side of the tee pointing down was a plug for a drain and the other side of the tee was about a 6 inch pipe pointing up. At the top of the pipe was a cap with a dipstick. I have modified a couple of M5s to this configuration. Just eyeball the level in the pipe and the top of the hydraulic case. If you add a 45 degree street ell to the drain side you can get the drained oil away from the tractor better. All three quarter inch pipe works for this.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Minneapolis Moline All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters