Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

gear shift


 
Post new topic    
View previous topic :: View next topic  
Author Message
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Tue Oct 12, 2021 1:37 pm    Post subject: gear shift Reply to specific post Reply with quote

IH H TRACTOR Gear shift locked up, How to get it unlocked?
 
Back to top
View user's profile
Rich'sToys
Tractor Guru


Joined: 09 Feb 2011
Posts: 3596
Location: MN

Report to Moderator

PostPosted: Tue Oct 12, 2021 1:48 pm    Post subject: Re: gear shift Reply to specific post Reply with quote


You'll probably have to pull the shift lever off (out the top). Then need to move the shift rails till all the slots are lined up.
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Tue Oct 12, 2021 1:56 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

ok the far one on the left will not move
 
Back to top
View user's profile
SVcummins
Tractor Guru


Joined: 06 Feb 2017
Posts: 24096


Report to Moderator

PostPosted: Tue Oct 12, 2021 2:00 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

You may have to Rock the tractor back and forth a little to get it to move
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Tue Oct 12, 2021 2:03 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

I will try that later Thank You will let you know
 
Back to top
View user's profile
super99
Tractor Guru


Joined: 19 Jan 2002
Posts: 6064
Location: Rock Island county, Ill

Report to Moderator

PostPosted: Tue Oct 12, 2021 3:33 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

You might have to block both sides of one wheel and jack the other side up to get the pressure off of the gears.
 
Back to top
View user's profile
flying belgian
Tractor Guru


Joined: 30 Aug 2008
Posts: 7236


Report to Moderator

PostPosted: Tue Oct 12, 2021 4:55 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

And when you have it out build the end up with weld and grind it down to its original profile so it don't happen again.
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:04 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

Is it right mind shows the two grooves one on right side, then space in the middle, then groove on the left which will not move tried everything you guys said.
tlever2003@yahoo.com
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:12 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

HOW do you find out what size it is?
 
Back to top
View user's profile
flying belgian
Tractor Guru


Joined: 30 Aug 2008
Posts: 7236


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:18 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

Build it up so it just fits in the slots. You should be able to tell how much is wore off.
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Thu Oct 14, 2021 5:00 am    Post subject: Re: gear shift Reply to specific post Reply with quote

ok THANKS'
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Fri Oct 15, 2021 5:35 am    Post subject: Re: gear shift Reply to specific post Reply with quote

Does that sound right about what I said about the grooves Help
 
Back to top
View user's profile
tom levandoski
Regular


Joined: 15 Aug 2011
Posts: 103


Report to Moderator

PostPosted: Fri Oct 15, 2021 6:05 pm    Post subject: Re: gear shift Reply to specific post Reply with quote

WHAT YOU GUYS TOLD ME i TRIED but i am wondering if i have the right grooves.
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Tractor Talk All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters