Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

101 Davis loader Used on Ford tractors


 
Post new topic    
View previous topic :: View next topic  
Author Message
TedinNE
Regular


Joined: 26 Feb 2011
Posts: 89


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:38 am    Post subject: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

Anyone know where to get parts for a double action control valve. Would also consider a complete used valve.

Thank you for any help,

Ted
 
Back to top
View user's profile
wore out
Tractor Expert


Joined: 01 Oct 2019
Posts: 3077


Report to Moderator

PostPosted: Wed Oct 13, 2021 7:53 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

CVPost-TedinNE wrote:
(quoted from post at 07:38:55 10/13/21) Anyone know where to get parts for a double action control valve. Would also consider a complete used valve.

Thank you for any help,

Ted


What parts do you need, the spools and body are usually considered a "matched set" and not available separately even when "new".

Do you need seals or springs? Or?
 
Back to top
View user's profile
TedinNE
Regular


Joined: 26 Feb 2011
Posts: 89


Report to Moderator

PostPosted: Wed Oct 13, 2021 8:12 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

Need centering springs and valve spool seals. Spool seal appears to be a drive in lip thpe seal. Do not have it apart.
 
Back to top
View user's profile
TheOldHokie
Tractor Guru


Joined: 08 Apr 2005
Posts: 11252
Location: Myersville, MD

Report to Moderator

PostPosted: Wed Oct 13, 2021 11:53 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

CVPost-TedinNE wrote:
(quoted from post at 10:38:55 10/13/21) Anyone know where to get parts for a double action control valve. Would also consider a complete used valve.

Thank you for any help,

Ted


You can buy a new valve for less than $100.

Dan
 
Back to top
View user's profile
Jim.ME
Tractor Guru


Joined: 02 Mar 2018
Posts: 4968


Report to Moderator

PostPosted: Wed Oct 13, 2021 1:02 pm    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

If you remove the seals you may be able to match them up at a seal supplier. As for the springs that will be a crap shoot. I tried a couple numbers from the parts book I posted for you and got no hits (see your post on the MF forum). I believe a new valve is your best option. Given the vintage of these valves, a used valve may just get you a second valve with problems.
 
Back to top
View user's profile
wore out
Tractor Expert


Joined: 01 Oct 2019
Posts: 3077


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:39 pm    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

TheOldHokie wrote:
(quoted from post at 12:53:29 10/13/21)
CVPost-TedinNE wrote:
(quoted from post at 10:38:55 10/13/21) Anyone know where to get parts for a double action control valve. Would also consider a complete used valve.

Thank you for any help,

Ted


You can buy a new valve for less than $100.

Dan


TOH, if his valve is like the one I am familiar with (pictured below) it is "purpose built" and fits nicely against the angled face of the loader mount that also serves as the hydraulic reservoir.



Return oil flows out of the valve at the mounting area and returns to the reservoir with no external connections/lines.

IF the O.P. can find lip seals for the spools (I'm pretty sure there's a thread on this in the archives somewhere with part numbers) and find generic replacements for the spool centering springs the end result will be nicer than trying to adapt a modern, generic, valve.

The way the spool centering springs work there's a little leeway in replacing them with generic compression springs.
 
Back to top
View user's profile
TedinNE
Regular


Joined: 26 Feb 2011
Posts: 89


Report to Moderator

PostPosted: Wed Oct 13, 2021 6:55 pm    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

Thank you everyone for all the replies. wore out the valve you picture is like mine. I have located the spool seals. As you say I
think I can use a generic spring and make it work. The lift spool spring must be weak or broken Have to help center it. Spool is
free.

Ted
 
Back to top
View user's profile
Hidude
New User


Joined: 04 Jul 2020
Posts: 15


Report to Moderator

PostPosted: Wed Oct 13, 2021 8:59 pm    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

I know you said you found the seals but ill jump in with this. Cr7440 is what I used. Can't remember if thats a single or double lip seal though. Mine may be a little different than yours. I have a davis 102a



 
Back to top
View user's profile
TheOldHokie
Tractor Guru


Joined: 08 Apr 2005
Posts: 11252
Location: Myersville, MD

Report to Moderator

PostPosted: Thu Oct 14, 2021 2:48 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

wore out wrote:
(quoted from post at 22:39:26 10/13/21)
TheOldHokie wrote:
(quoted from post at 12:53:29 10/13/21)
CVPost-TedinNE wrote:
(quoted from post at 10:38:55 10/13/21) Anyone know where to get parts for a double action control valve. Would also consider a complete used valve.

Thank you for any help,

Ted


You can buy a new valve for less than $100.

Dan


TOH, if his valve is like the one I am familiar with (pictured below) it is "purpose built" and fits nicely against the angled face of the loader mount that also serves as the hydraulic reservoir.



Return oil flows out of the valve at the mounting area and returns to the reservoir with no external connections/lines.

IF the O.P. can find lip seals for the spools (I'm pretty sure there's a thread on this in the archives somewhere with part numbers) and find generic replacements for the spool centering springs the end result will be nicer than trying to adapt a modern, generic, valve.

The way the spool centering springs work there's a little leeway in replacing them with generic compression springs.


Ahh yes - I have seen them before. They are a PITA design. I'd still replace it with a new one and put a cover plate and return fitting on the tank.

TOH
 
Back to top
View user's profile
Tom/Idaho
Long Time User


Joined: 22 Jan 2001
Posts: 515


Report to Moderator

PostPosted: Thu Oct 14, 2021 8:33 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

Where did you find that exploded picture of the valve?
Do you have a manual? My loader has that exact valve.
Thank you,
Tom/Idaho
 
Back to top
View user's profile
TheOldHokie
Tractor Guru


Joined: 08 Apr 2005
Posts: 11252
Location: Myersville, MD

Report to Moderator

PostPosted: Thu Oct 14, 2021 9:40 am    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

CVPost-Tom/Idaho wrote:
(quoted from post at 12:33:43 10/14/21) Where did you find that exploded picture of the valve?
Do you have a manual? My loader has that exact valve.
Thank you,
Tom/Idaho


The dealer parts manual can be downloaded from the N tractor club website.

TOH
 
Back to top
View user's profile
Tom/Idaho
Long Time User


Joined: 22 Jan 2001
Posts: 515


Report to Moderator

PostPosted: Thu Oct 14, 2021 3:42 pm    Post subject: Re: 101 Davis loader Used on Ford tractors Reply to specific post Reply with quote

TOH, thank you.

Tom/Idaho
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford 9N, 2N, 8N All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters