Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

John Deere Sulky plow # 268


 
Post new topic    
View previous topic :: View next topic  
Author Message
Duner Wi
Tractor Guru


Joined: 04 Feb 2001
Posts: 5022


Report to Moderator

PostPosted: Wed Jun 22, 2022 6:28 pm    Post subject: John Deere Sulky plow # 268 Reply to specific post Reply with quote

on main plow beam, might be model # 268 or part # of beam.
I would like to know how the tail wheel comes off.
Looks like you remove nuts from 4 -7/16 carriage bolts and outer hub should separate from wheel and inner hub. Mine has been sitting out doors unused for 75 years and wheel won't rotate. I got the other 2 wheels greased but this one is being difficult. Thank you.
 
Back to top
View user's profile
David from Kansas
Tractor Expert


Joined: 19 Nov 2000
Posts: 2670


Report to Moderator

PostPosted: Wed Jun 22, 2022 6:34 pm    Post subject: Re: John Deere Sulky plow # 268 Reply to specific post Reply with quote

That is a beam number. If the tail wheel is like most of the older trailer plows by JD, You take the bolts out of the wheel and there is a sleeve with a pin through it that when removed, the hub will come off. Might be hard to see the pin as it will be covered with grease. That is the best I can remember. A pretty simple procedure.
 
Back to top
View user's profile
Duner Wi
Tractor Guru


Joined: 04 Feb 2001
Posts: 5022


Report to Moderator

PostPosted: Wed Jun 22, 2022 7:20 pm    Post subject: Re: John Deere Sulky plow # 268 Reply to specific post Reply with quote

Here is photo of tail wheel.

 
Back to top
View user's profile
Duner Wi
Tractor Guru


Joined: 04 Feb 2001
Posts: 5022


Report to Moderator

PostPosted: Thu Jun 23, 2022 6:53 pm    Post subject: Re: John Deere Sulky plow # 268 Reply to specific post Reply with quote

Here it is apart, just like you described.

 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Implement Alley All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters