Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

530 ck com rebuild


 
Post new topic    
View previous topic :: View next topic  
Author Message
Ellisbh
New User


Joined: 06 Jun 2022
Posts: 4


Report to Moderator

PostPosted: Thu Aug 04, 2022 8:15 am    Post subject: 530 ck com rebuild Reply to specific post Reply with quote

I looking to see what it takes to rebuild com pump.
I have 45 psi when rpm near 2000. If i push clutch in it goes up to 65psi. Tractor will move on flat ground and if i let off thottle a little it seems to want to grab or engage a little more.

It has new filter, proper level and fluid. The control valve moves nice, clutch regulator spring hieght in spec. Not sure about convertor pressure regulator.
 
Back to top
View user's profile
Ellisbh
New User


Joined: 06 Jun 2022
Posts: 4


Report to Moderator

PostPosted: Fri Aug 05, 2022 6:05 am    Post subject: Re: 530 ck com rebuild Reply to specific post Reply with quote

I looking for john saeli, a couple months
back we were talking about this, he said
he had all parts for this tractor. I dont
know how to get back to him. Any help
would be appreciated.
 
Back to top
View user's profile
AJ.
Tractor Expert


Joined: 20 Oct 2007
Posts: 2480
Location: UK

Report to Moderator

PostPosted: Fri Aug 05, 2022 11:55 am    Post subject: Re: 530 ck com rebuild Reply to specific post Reply with quote

That is a gear type pump and as normal when they ware its the body and the end covers that ware as well as the gears so the whole pump needs to be replaced if it is worn, it does have a regulator valve fitted to it, have a look at the manual and you will see what I mean, if you type the part # of the pump in Google it will bring up any that are available.
AJ
 
Back to top
View user's profile
Ellisbh
New User


Joined: 06 Jun 2022
Posts: 4


Report to Moderator

PostPosted: Fri Aug 05, 2022 2:36 pm    Post subject: Re: 530 ck com rebuild Reply to specific post Reply with quote

AJ. wrote:
(quoted from post at 12:55:03 08/05/22) That is a gear type pump and as normal when they ware its the body and the end covers that ware as well as the gears so the whole pump needs to be replaced if it is worn, it does have a regulator valve fitted to it, have a look at the manual and you will see what I mean, if you type the part # of the pump in Google it will bring up any that are available.
AJ



I copy, thank you, i will go that route
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters