Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Crank pulley bolt


 
Post new topic    
View previous topic :: View next topic  
Author Message
Doug 13
Regular


Joined: 08 Nov 2021
Posts: 37


Report to Moderator

PostPosted: Wed Sep 21, 2022 7:22 pm    Post subject: Crank pulley bolt Reply to specific post Reply with quote

Would it be ok to change slotted bolt for a regular fine threaded bolt?
 
Back to top
View user's profile
Den N Ms
Tractor Guru


Joined: 20 Feb 2007
Posts: 6893


Report to Moderator

PostPosted: Thu Sep 22, 2022 3:05 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Doug 13 , I would rather have the crank bolt than a regular bolt.
So you can use a crank to turn the engine over for tune up work such as distributor work or setting valve lash.
 
Back to top
View user's profile
Abbby
Long Time User


Joined: 28 Mar 2009
Posts: 518


Report to Moderator

PostPosted: Thu Sep 22, 2022 3:32 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Will work just fine.
 
Back to top
View user's profile
Hobo,NC
Tractor Guru


Joined: 14 Jun 2007
Posts: 22366
Location: Sanford,NC

Report to Moderator

PostPosted: Thu Sep 22, 2022 5:52 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote


Depending on the style pully used it may need a harden washer between the bolt hex head and pully.
 
Back to top
View user's profile
lha
Tractor Expert


Joined: 27 Aug 2009
Posts: 2487


Report to Moderator

PostPosted: Thu Sep 22, 2022 8:23 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

I have used my crank for starting my 9n several times when my battery was discharged. It works well. I used
the same crank handle that came on my '48 Dodge truck.
 
Back to top
View user's profile
DMartin9N-2N
Long Time User


Joined: 23 Jul 2007
Posts: 1105


Report to Moderator

PostPosted: Thu Sep 22, 2022 11:23 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Good afternoon, lha: I have a 9N, and I also have a 1945 Dodge 1/2 ton truck with a crank. Maybe the crank will work in the 9N? Interesting thought.....
.
Dennis M. in W. Tenn.
.
 
Back to top
View user's profile
wore out
Tractor Guru


Joined: 01 Oct 2019
Posts: 5125


Report to Moderator

PostPosted: Thu Sep 22, 2022 12:06 pm    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

DMartin9N-2N wrote:
(quoted from post at 12:23:04 09/22/22) Good afternoon, lha: I have a 9N, and I also have a 1945 Dodge 1/2 ton truck with a crank. Maybe the crank will work in the 9N? Interesting thought.....
.
Dennis M. in W. Tenn.
.


''I also have a 1945 Dodge 1/2 ton truck with a crank. Maybe the crank will work in the 9N? Interesting thought..... ''

Actually, MANY cranks were interchangeable in the old days, it would be more of an ''oddball event'' to find one that WOULDN'T fit vs. one that WOULD fit, LOL!
 
Back to top
View user's profile
TheOldHokie
Tractor Guru


Joined: 08 Apr 2005
Posts: 11447
Location: Myersville, MD

Report to Moderator

PostPosted: Thu Sep 22, 2022 1:54 pm    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Doug 13 wrote:
(quoted from post at 23:22:03 09/21/22) Would it be ok to change slotted bolt for a regular fine threaded bolt?


Yes.

TOH
 
Back to top
View user's profile
lha
Tractor Expert


Joined: 27 Aug 2009
Posts: 2487


Report to Moderator

PostPosted: Thu Sep 22, 2022 2:10 pm    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

I got rid of my old Dodge when someone wanted it more than I did,but somehow kept the crank. Several days,I drove to work when it was dark in the morning,left the lights on,then to the delight of co-workers,cranked it by hand and drove home. Some teased me about the old relic,but were glad when I pulled them out of the mud after a day of rain. I live in W.Tn as well,outside of Jackson about 10 miles.
 
Back to top
View user's profile
Doug 13
Regular


Joined: 08 Nov 2021
Posts: 37


Report to Moderator

PostPosted: Thu Sep 22, 2022 6:00 pm    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Den N Ms wrote:
(quoted from post at 04:05:19 09/22/22) Doug 13 , I would rather have the crank bolt than a regular bolt.
So you can use a crank to turn the engine over for tune up work such as distributor work or setting valve lash.


Yes, good idea using a crank bolt for maintenance. I think I can buy it and a crank handle.
 
Back to top
View user's profile
Den N Ms
Tractor Guru


Joined: 20 Feb 2007
Posts: 6893


Report to Moderator

PostPosted: Fri Sep 23, 2022 1:02 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Doug 13 wrote:
(quoted from post at 19:00:39 09/22/22) [quote="Den N Ms"](quoted from post at 04:05:19 09/22/22) Doug 13 , I would rather have the crank bolt than a regular bolt.
So you can use a crank to turn the engine over for tune up work such as distributor work or setting valve lash.


Yes, good idea using a crank bolt for maintenance. I think I can buy it and a crank handle.[/quote]

Yes this great site has them.
SOM TING WONG LOL

This post was edited by Den N Ms on 09/23/2022 at 02:52 am.

 
Back to top
View user's profile
Den N Ms
Tractor Guru


Joined: 20 Feb 2007
Posts: 6893


Report to Moderator

PostPosted: Fri Sep 23, 2022 1:04 am    Post subject: Re: Crank pulley bolt Reply to specific post Reply with quote

Doug 13 wrote:
(quoted from post at 19:00:39 09/22/22)
Den N Ms wrote:
(quoted from post at 04:05:19 09/22/22) Doug 13 , I would rather have the crank bolt than a regular bolt.
So you can use a crank to turn the engine over for tune up work such as distributor work or setting valve lash.


Yes, good idea using a crank bolt for maintenance. I think I can buy it and a crank handle.


Yes this great site has them.
https://www.yesterdaystractors.com/Ford-8N_Crankshaft-Cranking-Ratchet_2N6319A1.html
https://www.yesterdaystractors.com/Ford-8N_Hand-Starting-Crank_351010R31.html


 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Ford 9N, 2N, 8N All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters