Silver and Deming drill bit set

[Greenfrog]

Wow, Im impressed with these reduced shank drill bits. Ordered from Amazon. At the time I was unaware of the brand. I just chose a set that looked good for the price. Eight bits from 9/16 to 1.
I later saw a YouTube on them (tubalcain) and didnt realize what I had.
Just thot I would pass this info on.
 

[M-MAN]

If you put them in a hand drill be extra careful or you will get hurt! Probably will anyway.
 

[DoubleO7]

I need another good set of bits.
Can you provide a link to what you bought?

Silver & Deming really is only a generic name for reduced shank drill bits. There is no company by that name now-a-days.

Over a hundred years ago there was such a company by that name that purportedly invented the reduced shank twist drill.
But they did not patent it.
 

[Greenfrog]

See attached pic


 

[Greenfrog]

This is what I ordered via Amazon. For home handyman use. If for professional use might want high quality. They seem to perform good.
 

[Janicholson]

Some imported from the east tools are great and some are almost OK, and some are very not OK. HSS is a good steel, but HSS is not defined well. I had a drill set given to me in which all the bits were ground with negative helical clearance, even resharpening them didn't make the steel any better.
WINMAX TOOLS AUTOMOTIVE is a trademark and brand of HANGZHOU WINTOOLS TECHNOLOGY DEVELOPMENT CO., LTD., XIAOSHAN DISTRICT, HANGZHOU, ZHEJIANG CHINA.
 

[Ted in NE-OH]

I got a set from Harbor Freight.
 

[caterpillar guy]

Drill bits that cheap for that size I would be wary of just due to most drills that size would be that much or more for good drill bits. 1 inch is a pretty good sized bit. One of my brothers closed a Machine repair business 20 years ago or more have lots of bit in the 1/2 -2 inch range available to use. Some may even be bigger.
 

[Moonlite37]

I have had a set for about 35 years and they work well.I know they are not professional quality, but are good enough for tractor work.About as good as you buy at the local hardware store, but less quality from a machine shop supplier, Be not discouraged by posters telling you they cannot do the job Just a few times a year.
 

[Loosehandle]

I use taper shank, old US makers. They work great with antique drill presses that also go slow enough for large sizes
 

[wp6529]

[DoubleO7]

Unfortunately, McMaster does not sell anything by brand, you can't chose buy by brand.
 

[wp6529]

[Janicholson]

I have good service from this Jobber. Jim
MSC industrial does sell by brand

 

[wp6529]