Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Case Comfort King distributer drive parts


 
Post new topic    
View previous topic :: View next topic  
Author Message
BarryfromIA
Tractor Expert


Joined: 26 Mar 2006
Posts: 1900
Location: North West Iowa

Report to Moderator

PostPosted: Tue Jan 24, 2023 6:06 pm    Post subject: Case Comfort King distributer drive parts Reply to specific post Reply with quote

I need an A 41414 coupling. This is the drive coupling on the bottom of the distributer and this is sheared off because of the tach drive siezed due to a lack of grease. This is about a 1966 model 730gas.
 
Back to top
View user's profile
J Hamilton
Tractor Guru


Joined: 07 Apr 2020
Posts: 3906


Report to Moderator

PostPosted: Tue Jan 24, 2023 6:16 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Might check with Brillman's or McDonald carb & ignition if you haven't already
 
Back to top
View user's profile
BarryfromIA
Tractor Expert


Joined: 26 Mar 2006
Posts: 1900
Location: North West Iowa

Report to Moderator

PostPosted: Tue Jan 24, 2023 7:52 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Ok checked Brillman's and found nothing, I might check by part no tomorrow.
 
Back to top
View user's profile
r.w.b.
Tractor Expert


Joined: 04 Jul 2016
Posts: 2107


Report to Moderator

PostPosted: Wed Jan 25, 2023 3:26 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

try standard magnito
wood dale ill
800 624 6386
they might have what you need. they got lots of nos oem parts. 1
guy there cant think of his name is a distributer expert .
 
Back to top
View user's profile
BarryfromIA
Tractor Expert


Joined: 26 Mar 2006
Posts: 1900
Location: North West Iowa

Report to Moderator

PostPosted: Thu Jan 26, 2023 9:51 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

I would be interested in a used distributer depending what's available and how complete.it is.
 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Sat Jan 28, 2023 7:21 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Is it like a small Lovejoy coupler? Take a couple of measurements from it. I've got one off a Prestolite distributor that you can have if it will fit your needs. steve
 
Back to top
View user's profile
Joe (Wa)
Tractor Expert


Joined: 01 Jan 1999
Posts: 3233


Report to Moderator

PostPosted: Sun Jan 29, 2023 9:56 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

.

 
Back to top
View user's profile
BarryfromIA
Tractor Expert


Joined: 26 Mar 2006
Posts: 1900
Location: North West Iowa

Report to Moderator

PostPosted: Sun Jan 29, 2023 10:35 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

The prestolite measurements are 1/2 shaft, 1/8" roll pin. Overall about 3/4" + in length and a little less than an inch in diameter. I'd be happy to take care of the shipping and give you something for the part.
 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Sun Jan 29, 2023 11:08 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Barry, here's a pic of what I have. It is about 1-9/16 long (without the shaft). One bore is right close to .500 +or- .002 (my caliper is in disagreement with my mic), and the other bore is .498 +or-. Role pins are 1/8. I can get it in the mail tomorrow, if it will fit your need. It was free to me, so free to you. steve

 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Sun Jan 29, 2023 11:11 am    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

If Joe's diagram is what you have, I don't think mine will work. steve
 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Sun Jan 29, 2023 1:23 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Unless, of course, you want to file one down to make one half of mine fit yours. Is yours aluminum? If so, I think you could make one out of half of this one I have. I get about 3/4 inch from the end, to the edge of the pin hole where you'd need to cut it off, and an OD of just under an inch. If yours is a tab on either side of the bore, and not a piece running all the way across, you could file mine down to be just like yours. With both halves of mine, you'd have two times to try to screw it up??!!! Let me know if you want to try it. Last time I sent something this small, it cost about $8. And the parts are free. steve

 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Sun Jan 29, 2023 1:35 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Try Jeff Schlemmer: He was very helpful. Built his own for an old Massey Harris 50, from one out of a Mini Cooper. jeff@advanceddistributors.com.
 
Back to top
View user's profile
BarryfromIA
Tractor Expert


Joined: 26 Mar 2006
Posts: 1900
Location: North West Iowa

Report to Moderator

PostPosted: Mon Jan 30, 2023 12:11 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

Thanks stevie for looking and thanks to Joe (wa)for the picture. My son is going to make one he says.
 
Back to top
View user's profile
stevieb49829
Long Time User


Joined: 07 Dec 2019
Posts: 1205


Report to Moderator

PostPosted: Mon Jan 30, 2023 4:50 pm    Post subject: Re: Case Comfort King distributer drive parts Reply to specific post Reply with quote

That would be a pretty simple project for a small lathe, and even better if you have a horizontal mill. Especially if it is aluminum. steve
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters