| View previous topic :: View next topic |
| Author |
Message |
vectordr@bellsouth.net
New User
Joined: 18 Mar 2023
Posts: 6
Report to Moderator
|
 Posted: Sat Mar 18, 2023 10:04 am Post subject: B Model Steering Stop Pin Replacement |
  |
|
I would appreciate information on replacing the steering stop pin on late model B Roll-O-Matic pedestal.
|
|
| Back to top |
|
 |
wore out
Tractor Guru
Joined: 01 Oct 2019
Posts: 6356
Report to Moderator
|
| Posted: Sat Mar 18, 2023 11:42 am Post subject: Re: B Model Steering Stop Pin Replacement |
|
|
What issue are you having, how to remove the old pin, perhaps?
|
|
| Back to top |
|
|
vectordr@bellsouth.net
New User
Joined: 18 Mar 2023
Posts: 6
Report to Moderator
|
| Posted: Sat Mar 18, 2023 1:44 pm Post subject: Re: B Model Steering Stop Pin Replacement |
|
|
Looks like the pin is broken as iy does not reach the steering sector. Are they pressed in?
|
|
| Back to top |
|
|
vectordr@bellsouth.net
New User
Joined: 18 Mar 2023
Posts: 6
Report to Moderator
|
| Posted: Sat Mar 18, 2023 1:49 pm Post subject: Re: B Model Steering Stop Pin Replacement |
|
|
| wore out wrote: | (quoted from post at 12:42:38 03/18/23)
What issue are you having, how to remove the old pin, perhaps? |
It looks like it is broken as it doesn't reach the sector teeth. I have what I think is a new one but don't know how to install. Thank you for the reply.
This post was edited by vectordr@bellsouth.net on 03/18/2023 at 02:53 pm.
|
|
| Back to top |
|
|
wore out
Tractor Guru
Joined: 01 Oct 2019
Posts: 6356
Report to Moderator
|
| Posted: Sat Mar 18, 2023 4:29 pm Post subject: Re: B Model Steering Stop Pin Replacement |
|
|
| vectordr@bellsouth.net wrote: | (quoted from post at 14:49:23 03/18/23) | wore out wrote: | (quoted from post at 12:42:38 03/18/23)
What issue are you having, how to remove the old pin, perhaps? |
It looks like it is broken as it doesn't reach the sector teeth. I have what I think is a new one but don't know how to install. Thank you for the reply.
This post was edited by vectordr@bellsouth.net on 03/18/2023 at 02:53 pm.
|
I'm not sure how hard the dowel pin is, I wonder, could a person drill and tap a hole in it, then pull it out with a slide hammer with a matching ''stud'' attached to it?
I suggest cross-posting this down lower on the Forum page, in the John Deere-specific Forum, likely someone there will have better info than I!
https://forums.yesterdaystractors.com/viewforum.php?f=18
|
|
| Back to top |
|
|
vectordr@bellsouth.net
New User
Joined: 18 Mar 2023
Posts: 6
Report to Moderator
|
| Posted: Sun Mar 19, 2023 5:06 pm Post subject: Re: B Model Steering Stop Pin Replacement |
|
|
Yes. The old partial pin needs removing and to install the new one.
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in
