View previous topic :: View next topic |
Author |
Message |
Steve K Regular
Joined: 05 May 2008 Posts: 26
Report to Moderator
|
Posted: Wed Sep 12, 2012 1:44 pm Post subject: TO 35 breather tube |
|
|
Does anyone know where to find a replacement breather tube for a 1959 To 35 gas engine? Mine has almost rusted off completly. Not sure if I could just fabricate a tube or if there is supposed to be a check valve of some sort in the tube or at the rocker cover. Thanks for the help. |
|
Back to top |
|
 |
s19438 Tractor Expert
Joined: 30 Mar 2010 Posts: 1923
Report to Moderator
|
Posted: Wed Sep 12, 2012 2:21 pm Post subject: Re: TO 35 breather tube |
|
|
walts tractor parts. $14.97 |
|
Back to top |
|
 |
to30to35mf35 Guest
Report to Moderator
|
Posted: Wed Sep 12, 2012 2:51 pm Post subject: Re: TO 35 breather tube |
|
|
take the tube to a ex/muffler shop thay can bend you a pipe |
|
Back to top |
|
 |
Charles in Aus. Tractor Expert
Joined: 16 May 2011 Posts: 2140 Location: Victoria , Australia
Report to Moderator
|
Posted: Wed Sep 12, 2012 11:43 pm Post subject: Re: TO 35 breather tube |
|
|
FE 35 breather tubes are made of 1/2'' copper pipe , fairly easy to bend and solder. |
|
Back to top |
|
 |
Steve K Regular
Joined: 05 May 2008 Posts: 26
Report to Moderator
|
Posted: Thu Sep 13, 2012 8:51 am Post subject: Re: TO 35 breather tube |
|
|
Thanks for the replies. I'll try to find Walts Tractor Parts. |
|
Back to top |
|
 |
Steve K Regular
Joined: 05 May 2008 Posts: 26
Report to Moderator
|
Posted: Thu Sep 13, 2012 12:26 pm Post subject: Re: TO 35 breather tube |
|
|
Walts no longer has them available. I guess I"ll have to fabricate one. |
|
Back to top |
|
 |
s19438 Tractor Expert
Joined: 30 Mar 2010 Posts: 1923
Report to Moderator
|
Posted: Thu Sep 13, 2012 1:20 pm Post subject: Re: TO 35 breather tube |
|
|
rats.
did you tell them to take the item off their web site since they don't carry it. |
|
Back to top |
|
 |
Jerry/MT Tractor Guru
Joined: 22 Jul 2003 Posts: 10481 Location: Western Montana
Report to Moderator
|
Posted: Thu Sep 13, 2012 3:59 pm Post subject: Re: TO 35 breather tube |
|
|
there is genrally a rstrictor orifice in the draft tube. Look at your old one and see if it"s there. |
|
Back to top |
|
 |
JPFL Guest
Report to Moderator
|
Posted: Fri Sep 14, 2012 6:10 am Post subject: Re: TO 35 breather tube |
|
|
Will a TO30 valve cover(Z129) interchange??? I have 2 of those. Jim --No-Advertising-in-Forums |
|
Back to top |
|
 |
Steve K Regular
Joined: 05 May 2008 Posts: 26
Report to Moderator
|
Posted: Fri Sep 14, 2012 8:40 am Post subject: Re: TO 35 breather tube |
|
|
Thanks Jerry, the tube is missing, broke off, right at the bend where it turns down. Not sure if the restictor was in that portion or at the valve cover. |
|
Back to top |
|
 |
Steve K Regular
Joined: 05 May 2008 Posts: 26
Report to Moderator
|
Posted: Fri Sep 14, 2012 8:44 am Post subject: Re: TO 35 breather tube |
|
|
Thanks jim, I'm not sure if they are the same. I should pull the cover off one of these days and adjust a noisy rocker. Would be a good time to replace cover. I'll do a bit of reserch or perhaps someone else might know if the covers are interchangable. |
|
Back to top |
|
 |
|