Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

gas tankcleaning


 
Post new topic    
View previous topic :: View next topic  
Author Message
jr150hp
Guest






Report to Moderator

PostPosted: Tue Mar 06, 2007 5:26 pm    Post subject: gas tankcleaning Reply to specific post Reply with quote

i fixed the sending unit on my 841 ford before i put the sender back in i happened to put my finger in the tank and felt it was rough and rusted inside . It seemed to be just on the topside the tractor ran great the fuel bowl show just a little bit of rust on the screen. is there a way to seal the rust in the tank or do i need to boil it and get the rust all out of it which i don't know how to do . i see there is some paint coatings you can put right on the rust anyone ever have sucess with this stuff if so whats the name of the product or should i not worry about it she's not a trailer queen i do work her fairly hard plowing and dicsing 7 acres a year takeing off hay and picking and spreading manure thanks JR.

 
Back to top
GlenIdaho
Guest






Report to Moderator

PostPosted: Tue Mar 06, 2007 9:10 pm    Post subject: Re: gas tankcleaning Reply to specific post Reply with quote

Jr.; There are several products on the market to clean and seal fuel tanks. I used U.S. Standard Fuel tank sealer and Metal Ready from Por 15. The Metal Ready will clean the tank as I believe it is a phosphoric acid. Once the tank is clean and dry you pour in a quart of the sealer and slosh it around and then let is drain. It applies a relatively thick coating of sealer on the inside of the tank. For more info on the product you can check out "Por 15" on the internet.

There are some radiator shops that will seal the tank for you. To do it myself it was a relatively easy process, just time consuming.

As far as worrying about it, it really depends on how bad the rust is. One thing you don't want to happen is a fire due to gas leaking on a hot manifold, etc. My tank didn't leak but like you I found rust inside and in some spots the metal appeared thinner than others. To be on the safe side I sealed the tank. Hope this helps.

 

Back to top
jr150hp
Guest






Report to Moderator

PostPosted: Wed Mar 07, 2007 7:16 am    Post subject: Re: gas tankcleaning Reply to specific post Reply with quote

thanks your right safety first

 
Back to top
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Paint and Bodywork All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters