Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

wiring diagram


 
Post new topic    
View previous topic :: View next topic  
Author Message
Georgia Steve
Guest






Report to Moderator

PostPosted: Fri May 11, 2007 8:32 am    Post subject: wiring diagram Reply to specific post Reply with quote

I have a friend who has a 1949 Model G Allis C tractor. The system originally had a 6 volt system. It has been converted to a 12 volt negative ground system. I have a wiring diagram for a 1950 WD tractor but it does not have a regulator in teh diagram. If you put the system as it is shown, the alternator gets very hot, It is a pull start engine although you have to turn a switch to give it power. The problem is the regulator is not wired in I am sure since when I pull the battery connection, the system does not continue to run. Is there anyone that has a good wiring diagram I can use for wiring this tractor back to normal? I would really appreciate it and I know my friend would be for ever in debted as he has done a lot of work to it and it looks great, just does not run correctly yet.

 
Back to top
Bryan Smith (SC)
Guest






Report to Moderator

PostPosted: Fri May 11, 2007 11:38 am    Post subject: Re: wiring diagram Reply to specific post Reply with quote

If it"s a GM 10Si al;ternator, the regulator"s built in. Duey Schutter has some good diagrams for conversions on his site.

 
Back to top
Georgia Steve
Guest






Report to Moderator

PostPosted: Fri May 11, 2007 11:45 am    Post subject: Re: wiring diagram Reply to specific post Reply with quote

Thank you for responding. I have this diagram and it is wired exactly like this BUT, this has a regulator. It is not built in I do not believe. Before the restoration started, this regulator had wires coming off it and to different locations. He thought when the new diagram came in he would be abkle to follow it, but the diagram he got in was for a 6 v. This regulator sits up from teh cutoff relay and ampere meter and is a black square. 3 connections at the bottom and one on top. Any ideas?

 
Back to top
Georgia Steve
Guest






Report to Moderator

PostPosted: Fri May 11, 2007 2:13 pm    Post subject: Re: wiring diagram Reply to specific post Reply with quote

I guess I may have made an error. Is it possible the "alternator" is actually a generator with a regulator seperate? That seems to be what I have. I hope you can help as I am in great need.

 
Back to top
steve(ill)
Guest






Report to Moderator

PostPosted: Fri May 11, 2007 2:43 pm    Post subject: Re: wiring diagram Reply to specific post Reply with quote

alternator has an aluminum housing and is asl long as it is diameter. a generator is a black housing 5 inch diameter and about 9 inches long. Generator needs a regulator. Generator has "F" and "A" terminals. Regulator has "F", "G" and "B" terminals. connect the F to F. connect the G (gen) to A (armature). Connect teh B (battery) to the ampmeter output. other side of ampmeter goes to the battery or key + terminal.

 
Back to top
tim[in]
Guest






Report to Moderator

PostPosted: Sat May 12, 2007 2:30 pm    Post subject: Re: wiring diagram Reply to specific post Reply with quote

BE CAREFUL when opening this file. when i try to look at it my virus protector says there is an unwanted file or virus found. everyone might want to up date their virus protectors. i know the sender had no intention of sending it but the people who do these things are sneaky. please dont let this keep any one from posting this needed info. we deeply appreciate it.i am working on my electricals systems on 2 tractors now myself.

 
Back to top
:   
Post new topic    Yesterday's Tractors Forum Index -> Allis Chalmers All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters