Case 46 Pedal Tractor

[RebeccaKS]

My uncle is auctioning off items from his farm, and one of the items is the old Case 46 pedal tractor we used to ride around on when we were kids.

Does anyone know the value of a Case 46 Pedal Tractor?
 

[IaGary]

My guide does not list a Case 46 pedal.

Give us an idea of it"s age.

First case pedal was a VAC from 1953 and is worth around $700 in good condition.

1955 400 pedal is around 1000 in good condition.

1958 800 $825 in good condition.

1965 830 $550.

Get us a picture and let us know how much it sells for.

Gary
 

[RebeccaKS]

Thank you Gary.
Here is a picture.
 

[casenut1]

looking for the picture.
 

[RebeccaKS]

I apologize, I had a little trouble posting the picture.

 

[IaGary]

I believe that is a 1070.Which would have come out in 1970.

Good condition value is 325. I would call that one average to just above average. So you be the judge.

If I am wrong on the model I am sure someone will correct me.

I have no idea why the #46 is on the side of it. Cause it is not a 46.

Let us know what it brings at auction.

Gary

Gary
 

[RebeccaKS]

Thank you Gary.
I will let you know what it goes for.
I'll have to ask my uncle about the "46".
: )
 

[rrlund]

Wow,that's nice! that "46" looks original to the tractor though doesn't it?
I'll bet Adirondack Case Guy on Tractor Talk and the Case forum would know something about it. He's a toy collector and was a Case dealer.
 

[Adirondack case guy]

That is an IH o6 or 56 carcase painted Case colors. It is not a Case pedal toy. My thought would be that someone labled it a 46, as in 56series IH. Case labled their 30and 70 series pedal toys 30s and 70s Pleasure Kings rather than say a 1030, or 1070 real tractor model. That might have been the painters thoughts mimicking say a 856 IH.
Loren the Acg.
 

[IaGary]

I think you are right after looking again.

That is a IH 56 frame.

Someone must wanted a case and used what they had to make one.

Amazing how you paint a model other colors and it's hard to figure out what it is.

Gary
 

[mmoline03]

That is a IH 806, 856, or 1026. They all used the same casting # which is I 64 that will be stamped in the side of the pedal tractor in between the pedals and rear axle. In that condition should bring $200. Somebody just put a custom paint job on it at one time.
 

[fred goodrich]

Farmall see the TA lever?