Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

AUTOLITE MAX 4095 starters


 
Post new topic    
View previous topic :: View next topic  
Author Message
chuck machinist
Tractor Guru


Joined: 05 Jul 2011
Posts: 3633
Location: chesapeake va.

Report to Moderator

PostPosted: Mon Oct 14, 2013 5:21 pm    Post subject: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

Any leads on where I may find a 10 tooth starter assembly for a Autolite Max 4095 for my 411 ?
 
Back to top
View user's profile
jstpa
Regular


Joined: 16 Feb 2004
Posts: 303
Location: s.c. PA

Report to Moderator

PostPosted: Mon Oct 14, 2013 6:05 pm    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

That is a really common old drive . Any starter rebuilder will either have it or can get it. If you cant find one email me and I'll get you one. jstpa
 
Back to top
View user's profile
chuck machinist
Tractor Guru


Joined: 05 Jul 2011
Posts: 3633
Location: chesapeake va.

Report to Moderator

PostPosted: Tue Oct 15, 2013 1:13 pm    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

Thanks for the information on the starter, your right, it is still available and quite common. My rebuild will be drastically reduced.. the starter drive is roughly priced at $40.00.Thanks!
 
Back to top
View user's profile
John Saeli
Tractor Guru


Joined: 19 Dec 2009
Posts: 4283


Report to Moderator

PostPosted: Tue Oct 15, 2013 5:02 pm    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

What did you decide on the nose cone?
 
Back to top
View user's profile
chuck machinist
Tractor Guru


Joined: 05 Jul 2011
Posts: 3633
Location: chesapeake va.

Report to Moderator

PostPosted: Tue Oct 15, 2013 5:14 pm    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

Ill have my hands on a starter carcass later this week John and then I will do a rebuild. At my leisure I will reweld the nose cone and save her for a spare. I will post some pics of the ring gear later in the week, when I get out to the farm. First glance does not look too worn .. I will take a small pry bar and rotate the entire ring gear for a good look!
 
Back to top
View user's profile
John Saeli
Tractor Guru


Joined: 19 Dec 2009
Posts: 4283


Report to Moderator

PostPosted: Wed Oct 16, 2013 3:58 am    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

Usually, the ring gear will be burred in 3 areas. I've spent many hours on tractors & old trucks, reaching thru the starter hole w/ a file, filing burred teeth because I was too lazy to fix them correctly.
 
Back to top
View user's profile
mEl
Tractor Guru


Joined: 28 Sep 1998
Posts: 5592


Report to Moderator

PostPosted: Wed Oct 16, 2013 4:13 pm    Post subject: Re: AUTOLITE MAX 4095 starters Reply to specific post Reply with quote

John Saeli wrote:
(quoted from post at 04:58:27 10/16/13) Usually, the ring gear will be burred in 3 areas. I've spent many hours on tractors & old trucks, reaching thru the starter hole w/ a file, filing burred teeth because I was too lazy to fix them correctly.


Check the armature for straight, when the nose breaks from broken gears often it tweaks the armature shaft some.

We welded a nose three times using stainless wire and a red preheat with a rosebud torch cooling it slowly. every time it broke it was at a different spot, the SS held perfectly.

I won't even tell you what DC engine we were trying to start!!!
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Case and David Brown All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters