Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

CAT 933


 
Post new topic    
View previous topic :: View next topic  
Author Message
dej(Jed)
Tractor Expert


Joined: 20 Aug 2004
Posts: 2878


Report to Moderator

PostPosted: Wed Jun 20, 2007 9:23 am    Post subject: CAT 933 Reply to specific post Reply with quote

I looked at a Cat 933 G front loader last nite. I am confused about the shuttle shift.
The guy tells me that you have to use the clutch and the shuttle arms together. Does that make sense? Also how hard are the steering clutches to adjust and replace?
 
Back to top
View user's profile
Anonymous
Guest






Report to Moderator

PostPosted: Wed Jun 20, 2007 10:09 am    Post subject: Re: CAT 933 Reply to specific post Reply with quote

I think what he was telling you is that you have to PUSH the clutch lever fordward to engage the master clutch stop break. You cannot shift if the tractor is moving. the clutches and brakes are not to hard to adjust,but they are rough to replace.
 
Back to top
AJK
Regular


Joined: 20 Feb 2003
Posts: 340


Report to Moderator

PostPosted: Wed Jun 20, 2007 10:28 am    Post subject: Re: CAT 933 Reply to specific post Reply with quote

The 933G is not a shuttle shift but a manual gearbox with a direction gear,you would select a gear with the main gearshift lever and go from forward to reverse using the F/R lever,each time you change direction you have to disengage the main engine clutch and move the F/R lever,the 933 is not an easy machine to work on as the loader frame is encasing most of the machine,the brakes and steering clutches can be adjusted from the outside,the final drives have to be removed to get to the steering clutch packs,the brakes can be replaced through service holes in the housing,all round a good loader.
AJ
 
Back to top
View user's profile
:   
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  

TRACTOR PARTS TRACTOR MANUALS
Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters