Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

464 gas oil leak

Post new topic    
View previous topic :: View next topic  
Author Message
Born to hunt

Joined: 18 Sep 2017
Posts: 40

Report to Moderator

PostPosted: Tue Nov 14, 2017 9:25 am    Post subject: 464 gas oil leak Reply to specific post Reply with quote

Hi all- Couple of questions on my 464:
Because I'm new at this, I'll describe the location of the part where I have an oil leak: There's a cover plate behind the distrubutor and coil. It's about 18" long and is fastened by 8 screws. There is an oil leak coming from behind this plate. What is the plate actually called, and is there any danger in removing it? Gasket recommendations?

Also, I'm having the gas tank lined. The PO had removed the gas lines due to rust in the tank. Can anyone help me with routing new lines to the fuel pump? I'm assuming copper lines. The tank has a glass sediment bowl and one line hook up on wither side of the tank.

Thank you!
Back to top
View user's profile
Tractor Guru

Joined: 30 Jan 2004
Posts: 29878
Location: St. Cloud, MN

Report to Moderator

PostPosted: Tue Nov 14, 2017 9:38 am    Post subject: Re: 464 gas oil leak Reply to specific post Reply with quote

Copper lines are not recommended as they can and do work harden and fail. Steel lines are best and easily shaped with a bending tool that limits kinking. Put a 1 turn loop in the line to allow for fitting and expansion and contraction. Jim
Back to top
View user's profile
Display posts from previous:   
Post new topic    Yesterday's Tractors Forum Index -> Farmall & International Harvester (IHC) All times are GMT - 8 Hours
Page 1 of 1

Jump to:  

Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters