Yesterday's Tractor Co.
Shop Now View Cart
   Allis Chalmers Case Farmall IH Ford 9N,2N,8N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   Traditional YT Forum ViewClassic View   RegisterRegister 
 ProfileProfile    Log inLog in 

Kamatsu D21 Blade Carriage

Post new topic    
View previous topic :: View next topic  
Author Message
Kyle in KY

Joined: 27 Oct 2011
Posts: 117

Report to Moderator

PostPosted: Mon Dec 11, 2017 6:50 pm    Post subject: Kamatsu D21 Blade Carriage Reply to specific post Reply with quote

I have a blade carriage (C channel) that had a whole and a cracked around the bottom of the blade carriage. My question, is it easier to remove the carriage pins where the blade pivots up and down or would it be easier to remove the bolts that hold the carriage mounts to the frame? I'm removing the complete blade carriage so I can flip it up and weld a new spine in the carriage C channel. Any suggestions is greatly appreciated.
Back to top
View user's profile
Tractor Guru

Joined: 01 Sep 2014
Posts: 3931

Report to Moderator

PostPosted: Sat Dec 23, 2017 1:20 pm    Post subject: Re: Kamatsu D21 Blade Carriage Reply to specific post Reply with quote

Try the pins first, if they don't come out easy with a few well directed hammer blows, unbolt it. It's about the same, either way you do it
Back to top
View user's profile
Post new topic    Yesterday's Tractors Forum Index -> Crawlers, Dozers, Loaders and Backhoes All times are GMT - 8 Hours
Page 1 of 1

Jump to:  

Fast Shipping!  Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

YT Home  |  Forums

Modern View Forum powered by phpBB © 2001, 2005 phpBB Group

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters